[fackamato]

If anyone's looking for some pictures of the install, here are some, perhaps they are helpful. I found that, due to the charge pipes not coming with bolts, I had to re-use the OEM bolts and it is quite difficult to to get them to work with the VRSF charge pipes. Once fully installed, there's a ~1mm gap between the head of the bolt and the flange of the charge pipe.

There was heavy rain today so I was not able to fully test them out, but so far no issues. I'm on a PTF stage1 flash, so once the weather dries up I'll do some pulls and log them to check for boost leaks.

Full album:

View post on imgur.com

Camera: Google Pixel XL