Mine only seemed to make a whistle on warm start then go away. I thought I’d take the fitment risk and try vtt
And found out the VTT breather fits in mine, at first I thought it wouldn’t but it has to be at a perfect angle. although instructions say to remove the stock gasket. Seems like there is a gasket already in the valve and the stock one would make it too tall, plus it would just be loose on top of what is there already.
We will see how it goes, if it starts spraying oil my stock cap is in the trunk.
Drove it around the block, got the revs high and don’t see any signs of oil
Last edited by blumagic; 11-17-2023 at 03:58 PM..
|