Quote:
Originally Posted by Justin.AutoTalent
Quote:
Originally Posted by jhpo0326
So when you say you are running both is that a BM3 Stage2 E85 with a JB4 Map1?
|
He's using BM3 as a back end flash.
Backend flash is a flash that runs in conjunction with the JB4 taking over functions such as air/fuel/timing (these functions are normally handled by the stock flash with some intervention from the JB4 to a small degree) while JB4 serves as the primary point for boost control |
Quote:
Originally Posted by Justin.AutoTalent
Quote:
Originally Posted by jhpo0326
So when you say you are running both is that a BM3 Stage2 E85 with a JB4 Map1?
|
He's using BM3 as a back end flash.
Backend flash is a flash that runs in conjunction with the JB4 taking over functions such as air/fuel/timing (these functions are normally handled by the stock flash with some intervention from the JB4 to a small degree) while JB4 serves as the primary point for boost control |
Got it but you are just using BM3 as your flashing tool to load in a BEF from BMS and/or MHD