Quote:
Originally Posted by mshab356
So then I am assuming taking out one EWG and one MAF and tuning the DME so that it reads one of each is way more difficult that I think?
|
The S55's DME code would need to be edited/re-written so that it only needed one MAF sensor and could control one EWG or; delete both EWG (employing an external wastegate) and run one MAF sensor or; delete both and run the DME in Speed/Density mode - the latter being the most ideal.
Some of this code may be able to be adapted from the N55 DME's code. It's hard to say at this point.