Quote:
Originally Posted by espressoo
Has anyone upgraded their front brakes (calipers and rotors) and relocated their front brakes (4-pot) to the rear? Is it doable without any major modifications involved? This is assuming a 19" wheel setup as a minimum.
The front "4-pot blue calipers" look identical to the CCB rear calipers. The only difference based on some searches is the thickness of the rotors by 2mm.
Iron Rotors (Stock):
- Front = 380mm x 30mm + 4-piston OEM Brembo calipers
- Rear = 370mm x 24mm + 2-piston OEM Brembo calipers
CCB (Optional):
- Front = 400mm x 38mm + 6-piston OEM Brembo calipers
- Rear = 380mm x 28mm + 4-piston OEM Brembo calipers
I'm just curious if anyone has successfully done this and what modifications (if any) was involved. Pics would be great!
|
I don't think the front rotors will work at all In the rear. The emergency brake sits in rear rotor hat.