Quote:
Originally Posted by Steve B.
For those of you concerned about the length of the tips, I ended up getting the longer length (120mm) and then notching them with a Dremel to fit over the stock exhaust pins. This allows for you to adjust how far you want the tips to stick out.
FYI, 120mm tips stick out way too far. Looks ridiculous.
I know the notch is not pretty, but its on the top of the tip and tucked way under the bumper, so you will never see it...
My notch is roughly 10-15mm allowing me to shove the tip on the stock exhaust farther, thus tucking them in so they are flush with the bumper. Without the notch, they stuck out way too far.
|
How did you get the clamp to get passed that notch on the muffler tip though? I want to do this same mod, but I couldn't figure it out.