bootmod3 for BMW F series Vehicles - General Discussion

OMMMG · 10-03-2018, 10:28 AM

Quote:

Originally Posted by Halim@HCP

Any chance you can record inside when driving? I want to go catless dp and AA midpipe, but unsure if it will be too loud for me

Quote:

Originally Posted by BayAreaF80

If you're keeping your stock muffler and running AA midpipe with catless DPs it'll be loud when you want it to be and quiet in efficient. With the exhaust flaps closed its just as quiet as stock. With them open on the other hand

Yeah I will try, but my car is hella loud! Like make your ears ring under full throttle, and I love it. Eventually I'm gonna get a customer single midpipe made(kind of like AA design, just not AA money) and have it straight piped in the rear!

I also drive a gear down typically since I've been running open exhaust, need to keep my cruising rpm around 3-3500ish, for bearable drone. Its not for the faint of heart and no flaps to save you lol.

I say this, if you question the thought of it being too loud, it probably is.

jay1k_ · 10-03-2018, 11:32 AM

Anyone in the St. Louis, MO area running BM3?

ApexM4CS · 10-04-2018, 02:24 PM

I drive a stock M4 for now and looking at just getting the best tune I can get on stock parts.

Is the 'Stage 1 OTS 93' the way to go? Also, Is that included as a free map or only the Stage 0 GTS, CS maps are free?

Also, with the Stage 1 OTS 93 tune, can I feel a significant increase in the burbles?

gman_newyork · 10-04-2018, 02:55 PM

Quote:

Originally Posted by apex_m4

I drive a stock M4 for now and looking at just getting the best tune I can get on stock parts.

Is the 'Stage 1 OTS 93' the way to go? Also, Is that included as a free map or only the Stage 0 GTS, CS maps are free?

Also, with the Stage 1 OTS 93 tune, can I feel a significant increase in the burbles?

The free maps that come with purchase are the CS, CSL and GTS. You get one additional map of your choice included in the purchase price. Base you single selection map based on your upgrades and octane. If you decide to mod past stage 1 you can purchase the map pack which gives you access to all OTS maps or you can also go custom.

Burbles are customizable to your preference with an OTS map.

ApexM4CS · 10-04-2018, 03:37 PM

Quote:

Originally Posted by gman_newyork

Quote:

Originally Posted by apex_m4

I drive a stock M4 for now and looking at just getting the best tune I can get on stock parts.

Is the 'Stage 1 OTS 93' the way to go? Also, Is that included as a free map or only the Stage 0 GTS, CS maps are free?

Also, with the Stage 1 OTS 93 tune, can I feel a significant increase in the burbles?

The free maps that come with purchase are the CS, CSL and GTS. You get one additional map of your choice included in the purchase price. Base you single selection map based on your upgrades and octane. If you decide to mod past stage 1 you can purchase the map pack which gives you access to all OTS maps or you can also go custom.

Burbles are customizable to your preference with an OTS map.

Quote:

Originally Posted by gman_newyork

Quote:

Originally Posted by apex_m4

I drive a stock M4 for now and looking at just getting the best tune I can get on stock parts.

Is the 'Stage 1 OTS 93' the way to go? Also, Is that included as a free map or only the Stage 0 GTS, CS maps are free?

Also, with the Stage 1 OTS 93 tune, can I feel a significant increase in the burbles?

The free maps that come with purchase are the CS, CSL and GTS. You get one additional map of your choice included in the purchase price. Base you single selection map based on your upgrades and octane. If you decide to mod past stage 1 you can purchase the map pack which gives you access to all OTS maps or you can also go custom.

Burbles are customizable to your preference with an OTS map.

Awesome, exactly what I wanted to know. Thanks!

chewbakam4 · 10-05-2018, 08:04 AM

Just tried playing with some aggression and delay settings I think I love the way it sounds at 1.5s duration and 5.5 for aggression. I also did some testing with my own map to make custom by taking the stock map and importing the CS into it and been looking at differences last few weeks. Made my own custom CS with my own exhaust valve setup and burble too haha! So awesome!!

Johnny135i.za · 10-05-2018, 04:44 PM

Quote:

Originally Posted by KlEaR

So I have an issue that i could not find the answer through searches.I have a 18’ M4 ZCP. I installed the bootmod3 OBD AGENT for windows, downloaded/installed java 8 went to flash a m4 cs stage 0 tune and midway, the boodmod3 said error at 48% now my car will not start makes a humming noise and the OBD agent/bootmod3 says DME software details unavailable. Tried disconnecting the battery and left it dissconnected for 10 min tried and same issue, it cant read the dme. My ENET cable is securly connected on both ends. Please help. tIA

Did you manage to get sorted out bud?i hope the car is running again!

Issues like these scare the hell out of me, even though I know they always get taken care of...

blockdoc · 10-06-2018, 12:44 AM

Hey guys. I have in fact created a ticket. I have a custom Paul Johnson Tune. Interestingly, when I send Paul the data logs, it has the name of my tune, but not the correct tune on it.

Paul asked me to send a new tune request, but when I try, no matter what I put for new tune name, I see "Name cannot be left blank", so I cannot complete the task. i have tried this on my desktop and my phone. No difference. Any thoughts?

proTUNING Freaks · 10-07-2018, 12:34 PM

Quote:

Originally Posted by Johnny135i.za

Did you manage to get sorted out bud?i hope the car is running again!

Issues like these scare the hell out of me, even though I know they always get taken care of...

Long ago

There's nothing to worry about ever with flashing over OBD. There's never been a case where someone couldn't get it back. When there's an issue its always one of the items we have recently documented on our Wiki, link here:

https://bootmod3.atlassian.net/wiki/...+Online+Recode

In a nutshell, turn off firewall/antivirus, any piggybacks devices including exhaust valve controllers (they interrupt communication as they're connected to OBD) and you're set.

Quote:

Originally Posted by blockdoc

Hey guys. I have in fact created a ticket. I have a custom Paul Johnson Tune. Interestingly, when I send Paul the data logs, it has the name of my tune, but not the correct tune on it.

Paul asked me to send a new tune request, but when I try, no matter what I put for new tune name, I see "Name cannot be left blank", so I cannot complete the task. i have tried this on my desktop and my phone. No difference. Any thoughts?

Are you using Chrome? If not give that a shot or email us at support@protuningfreaks.com and we can look into it with you

BIGW0RM · 10-08-2018, 12:18 PM

Is there a DEFAULT setting for all the adjusters?

What happens when people slide the settings all over and want to go back to stock settings on the adjusters?

Djdnav · 10-09-2018, 04:37 AM

Quote:

Originally Posted by BIGW0RM

Is there a DEFAULT setting for all the adjusters?

What happens when people slide the settings all over and want to go back to stock settings on the adjusters?

There’s a drop down menu that allows you to select OEM/OTS/custom

BIGW0RM · 10-09-2018, 10:29 AM

Quote:

Originally Posted by Djdnav

There’s a drop down menu that allows you to select OEM/OTS/custom

Thank you. I didn't realize the custom settings defaulted back once you open and close those menus.

BIGW0RM · 10-09-2018, 10:40 AM

Quote:

Originally Posted by chewbakam4

Just tried playing with some aggression and delay settings I think I love the way it sounds at 1.5s duration and 5.5 for aggression. I also did some testing with my own map to make custom by taking the stock map and importing the CS into it and been looking at differences last few weeks. Made my own custom CS with my own exhaust valve setup and burble too haha! So awesome!!

Is the 1.5's for both timers?

5.5 seems HIGH? Is that gunshot loud?

chewbakam4 · 10-09-2018, 11:50 AM

I don’t get gunshots at all. I actually went down to 1.0 seconds now for duration.

Bluesummer · 10-09-2018, 12:22 PM

Quote:

Originally Posted by proTUNING Freaks

Lots of options there for burble adjustment. You can adjust it on the AGG (aggressive burble) Stage 2 OTS map or any of the other ones. Aggression slider in the app changes the ignition timing retard for burble. In a nutshell, the higher the number, the more ignition retard, the louder it gets. Along with that you get to change duration, rpm cut off min/max and and vehicle speed cut off min/max. We're adding some more features/changes in here based on user feedback that'll make it adjustable even further

can you guys make the exhaust pop louder on the up shift like the stock X5/6M? I like the machine gun burble but I certainly do miss the shot gun pop.

BIGW0RM · 10-09-2018, 12:45 PM

Quote:

Originally Posted by chewbakam4

I don’t get gunshots at all. I actually went down to 1.0 seconds now for duration.

on both sliders?

I see two duration sliders.

chewbakam4 · 10-10-2018, 07:00 AM

Quote:

Originally Posted by BIGW0RM

on both sliders?

I see two duration sliders.

Yeah right now I just set them both the same.

proTUNING Freaks · 10-10-2018, 12:32 PM

UPDATE:

https://f80.bimmerpost.com/forums/sh....php?t=1543836

BIGW0RM · 10-10-2018, 02:58 PM

Quote:

Originally Posted by chewbakam4

Yeah right now I just set them both the same.

TY.Me too.

proTUNING Freaks · 10-11-2018, 10:30 AM

UPDATE:

https://f80.bimmerpost.com/forums/sh....php?t=1544134

Johnny135i.za · 10-13-2018, 04:58 AM

Quote:

Originally Posted by proTUNING Freaks

Long ago

There's nothing to worry about ever with flashing over OBD. There's never been a case where someone couldn't get it back. When there's an issue its always one of the items we have recently documented on our Wiki, link here:

https://bootmod3.atlassian.net/wiki/...+Online+Recode

In a nutshell, turn off firewall/antivirus, any piggybacks devices including exhaust valve controllers (they interrupt communication as they're connected to OBD) and you're set.

Are you using Chrome? If not give that a shot or email us at support@protuningfreaks.com and we can look into it with you

That’s great to hear!!keep it up!!!

FAKE__NEWS · 10-13-2018, 07:44 AM

Has anybody had the iOS update yet? Been refreshing that update page for two days!

10-03-2018, 11:32 AM	#2290
jay1k_ Second Lieutenant 12 Rep 222 Posts Drives: F90 M5 Join Date: Nov 2016 Location: St. Louis, MO iTrader: (0)	Anyone in the St. Louis, MO area running BM3?
	Appreciate 0 Quote

10-04-2018, 02:24 PM	#2291
ApexM4CS ///M4 51 Rep 149 Posts Drives: '23 M3CX / '21 X7 Join Date: Feb 2009 Location: Apex, NC iTrader: (0)	I drive a stock M4 for now and looking at just getting the best tune I can get on stock parts. Is the 'Stage 1 OTS 93' the way to go? Also, Is that included as a free map or only the Stage 0 GTS, CS maps are free? Also, with the Stage 1 OTS 93 tune, can I feel a significant increase in the burbles? __________________ Instagram: @Dracula.M3CX Current BMWs: '23 M3CX, '23 X7 Previous BMWs: '21 X7, '19 M4 CS, '20 X7, '15 M4, '18 X3, '17 X5, '17 X1, '06 325i, '02 M3, '03 330i ZCP
	Appreciate 0 Quote

10-05-2018, 08:04 AM	#2294
chewbakam4 Major 717 Rep 1,184 Posts Drives: F82 M4 Join Date: Oct 2015 Location: Malton iTrader: (0)	Just tried playing with some aggression and delay settings I think I love the way it sounds at 1.5s duration and 5.5 for aggression. I also did some testing with my own map to make custom by taking the stock map and importing the CS into it and been looking at differences last few weeks. Made my own custom CS with my own exhaust valve setup and burble too haha! So awesome!!
	Appreciate 1 damageprone580.50 Quote

10-06-2018, 12:44 AM	#2296
blockdoc Lieutenant 373 Rep 500 Posts Drives: 2015 M4 Join Date: Jul 2018 Location: Santa Barbara, CA iTrader: (0)	Can't find custom tune Hey guys. I have in fact created a ticket. I have a custom Paul Johnson Tune. Interestingly, when I send Paul the data logs, it has the name of my tune, but not the correct tune on it. Paul asked me to send a new tune request, but when I try, no matter what I put for new tune name, I see "Name cannot be left blank", so I cannot complete the task. i have tried this on my desktop and my phone. No difference. Any thoughts?
	Appreciate 0 Quote

10-08-2018, 12:18 PM	#2298
BIGW0RM You got my money? 3168 Rep 4,653 Posts Drives: Ice Cream Truck Join Date: Jul 2011 Location: ///OC iTrader: (14) Garage List 2022 BMW M3 [9.50]	Is there a DEFAULT setting for all the adjusters? What happens when people slide the settings all over and want to go back to stock settings on the adjusters? __________________ 2022 G80 M3 Competition X / 2020 Range Rover Sport P525 / 2023 Ford Raptor
	Appreciate 1 damageprone580.50 Quote

10-09-2018, 11:50 AM	#2302
chewbakam4 Major 717 Rep 1,184 Posts Drives: F82 M4 Join Date: Oct 2015 Location: Malton iTrader: (0)	I don’t get gunshots at all. I actually went down to 1.0 seconds now for duration.
	Appreciate 0 Quote

10-10-2018, 12:32 PM	#2306
proTUNING Freaks BimmerPost Supporting Vendor 4499 Rep 1,862 Posts Drives: powered by bootmod3 Join Date: Oct 2014 Location: www.protuningfreaks.com \| www.bootmod3.com iTrader: (0)	UPDATE: https://f80.bimmerpost.com/forums/sh....php?t=1543836 __________________ YouTube Channel [NEW] \| Facebook User Group (20,000+ members) \| Tech Support Website \| Wiki \| FAQ \| iOS App \| Android App \| bootmod3 Web Sales Support Email: sales@protuningfreaks.com \| Tech Support Email: support@protuningfreaks.com
	Appreciate 0 Quote

10-11-2018, 10:30 AM	#2308
proTUNING Freaks BimmerPost Supporting Vendor 4499 Rep 1,862 Posts Drives: powered by bootmod3 Join Date: Oct 2014 Location: www.protuningfreaks.com \| www.bootmod3.com iTrader: (0)	UPDATE: https://f80.bimmerpost.com/forums/sh....php?t=1544134 __________________ YouTube Channel [NEW] \| Facebook User Group (20,000+ members) \| Tech Support Website \| Wiki \| FAQ \| iOS App \| Android App \| bootmod3 Web Sales Support Email: sales@protuningfreaks.com \| Tech Support Email: support@protuningfreaks.com
	Appreciate 0 Quote

10-13-2018, 07:44 AM	#2310
FAKE__NEWS Second Lieutenant 64 Rep 204 Posts Drives: F80 M3 Join Date: Jun 2018 Location: NoVA iTrader: (3)	Has anybody had the iOS update yet? Been refreshing that update page for two days!
	Appreciate 0 Quote