Remus Slip On paired to Active Autowerke Midpipes

[Justin.AutoTalent]

Originally Posted by AhsanU

I'll be running this setup with a DP very soon

I'll be sure to get clips as soon as it happens.

[JiggaWang]

Anymore videos?

[mike@x-ph.com]

Originally Posted by JiggaWang

Anymore videos?

We should have some more next week

[Justin.AutoTalent]

Originally Posted by JiggaWang

Anymore videos?

I'll probably have some tonight. Weather is good and my usual film spot is open

[Justin.AutoTalent]

Originally Posted by JiggaWang

Anymore videos?

Originally Posted by mike@x-ph.com

We should have some more next week

Video's up

I will attach to the first post.

One thing to note for people who already have Remus, you will need the adapter that comes with the axle back, it's a 2.75" adapter to 2.5".

[eandy]

Car sounds and looks fantastic! cheers for the video for reference.

I'm UK based got an Active Autowerkes mid pipe currently being shipped across and plan to go the Remus back box route so obviously taken interest as it'll be the set up I will have.

You mention a 2.75" to 2.5" adapter is this included within the kit for the Remus or AA? or something I'll need to source in prior to fitted?

Also been told I'll need new gaskets for the front end of the mid-pipe where it links to the downpipes.

[WheelsCollection]

sounds really good !

[rr006rbc]

I've got this combo too with valves open at all times. Truly sounds amazing..

[TurboAL47]

decisions decisions. no chance you guys will add downpipes, lol.

[Justin.AutoTalent]

Originally Posted by eandy

Car sounds and looks fantastic! cheers for the video for reference.

I'm UK based got an Active Autowerkes mid pipe currently being shipped across and plan to go the Remus back box route so obviously taken interest as it'll be the set up I will have.

You mention a 2.75" to 2.5" adapter is this included within the kit for the Remus or AA? or something I'll need to source in prior to fitted?

Also been told I'll need new gaskets for the front end of the mid-pipe where it links to the downpipes.

The adapter should be provided with the Remus Axle Back.

Remus is a 2.75" pipe, vs Active 3.5 single to 2.5"

The gaskets towards the downpipes are pretty sensitive, but sometimes when removing the exhaust, they stay fully intact

Originally Posted by WheelsCollection

sounds really good !

Thanks!

Originally Posted by rr006rbc

I've got this combo too with valves open at all times. Truly sounds amazing..

I agree! This plus the maximum psi intake sounds amazing in cabin!

Originally Posted by TurboAL47

decisions decisions. no chance you guys will add downpipes, lol.

lewz4 soon

AhsanU has this on his car right now. I think... He might be local to you?

[mike@x-ph.com]

Originally Posted by TurboAL47

decisions decisions. no chance you guys will add downpipes, lol.

Thats a video of AA midpipe + REMUS Axle back + VRSF Downpipes

[TurboAL47]

Originally Posted by mike@x-ph.com

Thats a video of AA midpipe + REMUS Axle back + VRSF Downpipes

Thanks Mike, i saw that. was hoping to see a few more setups with videos to help sway my decision.

[TurboAL47]

Originally Posted by justinauto

The adapter should be provided with the Remus Axle Back.

Remus is a 2.75" pipe, vs Active 3.5 single to 2.5"

The gaskets towards the downpipes are pretty sensitive, but sometimes when removing the exhaust, they stay fully intact



Thanks!



I agree! This plus the maximum psi intake sounds amazing in cabin!



lewz4 soon

AhsanU has this on his car right now. I think... He might be local to you?

thanks Justin. hopefully i get to see it "around town" soon.

[mike@x-ph.com]

Originally Posted by TurboAL47

Thanks Mike, i saw that. was hoping to see a few more setups with videos to help sway my decision.

We sold a couple combos this week... Hopefully customers will post new videos in the next 1-2 weeks.

[JiggaWang]

Sounds amazing! Thank you!

[Justin.AutoTalent]

Originally Posted by JiggaWang

Sounds amazing! Thank you!

No problem!

Hope the videos helped.

[AhsanU]

Originally Posted by TurboAL47

thanks Justin. hopefully i get to see it "around town" soon.

I'm in Astoria regularly actually if you're around! If you want to hear it in person after the weather dissipates, I'd be more than happy to give you a ride in the car. I'm primarily in Pelham Parkway/the Bronx though.

I actually recorded some decent clips tonight.. but lo and behold, the video file became corrupted. I'll see if I can bother my wife again tonight and get it done, since it'll be snowing for the next week or two.

[TurboAL47]

Originally Posted by AhsanU

I'm in Astoria regularly actually if you're around! If you want to hear it in person after the weather dissipates, I'd be more than happy to give you a ride in the car. I'm primarily in Pelham Parkway/the Bronx though.

I actually recorded some decent clips tonight.. but lo and behold, the video file became corrupted. I'll see if I can bother my wife again tonight and get it done, since it'll be snowing for the next week or two.

can definitely meet up one day to check it out. i'm in fresh meadows. you might know jaszz42 who is from astoria. we usually do a queens meet on thursday nights during the summer if you want to troop it from the bronx.

car sounds like a beast. really leaning towards this or an akra slip-on.

[Tiger1016]

Wanted to bump this up to see if anyone had some additional videos now. I am considering this pairing as an alternative to my current setup. Recently installed the AA mid, ZCP rear, and stock DPs and was surprised to find out that I would prefer some additional volume. Remus + AA mid sounds quite awesome and seems quite a bit louder. I am concerned about the Remus cold start valve ringing/ratteling issue (has anyone found a fix to this yet?), so I am also considering FI and Dinan rear sections as other alternatives.

[JiggaWang]

Originally Posted by Tiger1016

Wanted to bump this up to see if anyone had some additional videos now. I am considering this pairing as an alternative to my current setup. Recently installed the AA mid, ZCP rear, and stock DPs and was surprised to find out that I would prefer some additional volume. Remus + AA mid sounds quite awesome and seems quite a bit louder. I am concerned about the Remus cold start valve ringing/ratteling issue (has anyone found a fix to this yet?), so I am also considering FI and Dinan rear sections as other alternatives.

I'm in the same boat! This seems like the ideal setup for me, but the cold start rattling issue is a concern. I've contacted a few vendors and they either say they've never experienced it on their Remus installs or that it only happened to a few customers, and was earlier on - no recent reports of the rattling issue with more recent installs of Remus.

[Justin.AutoTalent]

Originally Posted by Tiger1016

Wanted to bump this up to see if anyone had some additional videos now. I am considering this pairing as an alternative to my current setup. Recently installed the AA mid, ZCP rear, and stock DPs and was surprised to find out that I would prefer some additional volume. Remus + AA mid sounds quite awesome and seems quite a bit louder. I am concerned about the Remus cold start valve ringing/ratteling issue (has anyone found a fix to this yet?), so I am also considering FI and Dinan rear sections as other alternatives.

Originally Posted by JiggaWang

I'm in the same boat! This seems like the ideal setup for me, but the cold start rattling issue is a concern. I've contacted a few vendors and they either say they've never experienced it on their Remus installs or that it only happened to a few customers, and was earlier on - no recent reports of the rattling issue with more recent installs of Remus.

The rattling is the result of the pressure from the air flow. The 2.75" dual mid pipe creates much more flow than the single 3.5" mid pipe by active autowerkes. The remus non resonated has a lot of rattle on cold start, whereas the AA mid pipe paired to remus has no rattle on cold start.

[Tiger1016]

Originally Posted by Justin.AutoTalent

The rattling is the result of the pressure from the air flow. The 2.75" dual mid pipe creates much more flow than the single 3.5" mid pipe by active autowerkes. The remus non resonated has a lot of rattle on cold start, whereas the AA mid pipe paired to remus has no rattle on cold start.

Thanks Justin. Seems to make sense and helpful to know.