F82 M4 Rear Spoiler recommendations

[iaba]

Looking for a rear spoiler in the design of the original M-Performance spoiler but with a nice curve upwards. Shouldn’t be too big and avaliable in europe, since i live in germany.

Would love some recommendations and pictures!

[WhiteFox]

Get the G82 M Performance spoiler looks amazing.

[Yuille36]

I would check out the spoiler options offered by RW Carbon.

https://www.rwcarbon.com/62/9/0/0/trunk-spoilers.html

[iaba]

WhiteFox Absolutely! Unfortunately ther’s no way for me to drive this legally on my F82 here in germany.

Yuille36 Thanks a lot, they really have some good looking spoilers.

[N1rve]

Originally Posted by Yuille36

I would check out the spoiler options offered by RW Carbon.

https://www.rwcarbon.com/62/9/0/0/trunk-spoilers.html

I do not recommend buying anything RW Carbon lol. People on here have complained about their customer service.

[Yuille36]

Well, the only thing I've personally bought from RW Carbon was there Carbon Fiber Front Splash Guards. And if their part's quality and fitment is on point, you truly wouldn't need customer service.....

[NSX2M4]

The only spoilers they make for an M4 F82 in an OEM shape/flow with a slightly higher gurney flap is listed below. They also fit incorrectly. OEM uses very thin vacuum bagged CF that can flex and twist. Aftermarket parts are a mold that uses fiberglass as a base with CF overlay. It does not flex, it does not give. For example, I have the M performance oem spoiler and you can twist the spoiler from side to side a full 120 degrees.

1)https://www.modecarbon.com/product/f...mance-spoiler/

2) https://vorsteiner.com/products/bmw-...-pp-1x1-glossy

[N1rve]

Originally Posted by Yuille36

Well, the only thing I've personally bought from RW Carbon was there Carbon Fiber Front Splash Guards. And if their part's quality and fitment is on point, you truly wouldn't need customer service.....

That's the problem. It hasn't been. lol.

[HotRodM4]

Originally Posted by NSX2M4

The only spoilers they make for an M4 F82 in an OEM shape/flow with a slightly higher gurney flap is listed below. They also fit incorrectly. OEM uses very thin vacuum bagged CF that can flex and twist. Aftermarket parts are a mold that uses fiberglass as a base with CF overlay. It does not flex, it does not give. For example, I have the M performance oem spoiler and you can twist the spoiler from side to side a full 120 degrees.

1)https://www.modecarbon.com/product/f...mance-spoiler/

2) https://vorsteiner.com/products/bmw-...-pp-1x1-glossy

That Mode Carbon one is exactly what I’ve been looking for. A slightly more aggressive OEM+ spoiler. The Vorsteiner one looks too chunky.

Might have to bite the bullet on that 4-6 weeks shipping 😂

[NSX2M4]

Originally Posted by HotRodM4

That Mode Carbon one is exactly what I’ve been looking for. A slightly more aggressive OEM+ spoiler. The Vorsteiner one looks too chunky.

Might have to bite the bullet on that 4-6 weeks shipping ��

I've heard people having issues with Mode Carbon. They were a very early vendor to this platform and are not as popular today. Honestly, I'd probably have one of their spoilers if it wasn't for hearing the stories here but, OEM carbon there is almost no comparison in quality.

[HotRodM4]

Originally Posted by NSX2M4

I've heard people having issues with Mode Carbon. They were a very early vendor to this platform and are not as popular today. Honestly, I'd probably have one of their spoilers if it wasn't for hearing the stories here but, OEM carbon there is almost no comparison in quality.

Appreciate the response. Those long wait times are def a red flag 🚩.

[NSX2M4]

Originally Posted by HotRodM4

Appreciate the response. Those long wait times are def a red flag 🚩.

Not necessarily. I waited a couple months for my carbon 1.5 diffuser and the quality blew me away. It was basically better than oem. So, a custom made part such as the mode spoiler, it's acceptable. But a risk, yes. Double check the return policies first I'd say.

[iaba]

Originally Posted by NSX2M4

The only spoilers they make for an M4 F82 in an OEM shape/flow with a slightly higher gurney flap is listed below. They also fit incorrectly. OEM uses very thin vacuum bagged CF that can flex and twist. Aftermarket parts are a mold that uses fiberglass as a base with CF overlay. It does not flex, it does not give. For example, I have the M performance oem spoiler and you can twist the spoiler from side to side a full 120 degrees.

1)https://www.modecarbon.com/product/f...mance-spoiler/

2) https://vorsteiner.com/products/bmw-...-pp-1x1-glossy

Thank you very much!

The Vorsteiner is a bit too chunky for my taste.
The Mode Carbon is exactly what i was looking Unfortunately i can‘t find this one anywhere here in the EU (Germany). And i don‘t think the TÜV would approve that spoiler

[NSX2M4]

Originally Posted by iaba

Thank you very much!

The Vorsteiner is a bit too chunky for my taste.
The Mode Carbon is exactly what i was looking Unfortunately i can‘t find this one anywhere here in the EU (Germany). And i don‘t think the TÜV would approve that spoiler

Just get the OEM M performance one. It looks great and fits like a glove.

[WhiteFox]

Originally Posted by NSX2M4

Just get the OEM M performance one. It looks great and fits like a glove.

Would agree tolerance is very good.

[drew310]

No spoiler looks the best

[HotRodM4]

Originally Posted by drew310

No spoiler looks the best

My thoughts exactly 😅

[iaba]

Originally Posted by NSX2M4

Just get the OEM M performance one. It looks great and fits like a glove.

Found a pretty cheap M Performance one and just bought that one now.
Now i only have to remove the PSM style spoiler from the car that the previous owner installed and then put the M Performance spoiler on it. Hope i like it, eventhough i think a spoiler with a bit more of a upwards curve would probably look very nice aswell.

[N1rve]

Are we just going to share our wingless trunk now? LOL