08-03-2022, 07:44 AM | #1 |
Enlisted Member
23
Rep 45
Posts |
Squared Setup on 666m?
Hey All,
As the title states, I'm running 666ms on my '18 M3 Comp. I was looking for one specifically that had these particular wheels (I Love Them) lol Anyway, is there anyway I could run a squared setup to make rotating tires much easier to save money from buying new ones all the time? Only thing I was thinking is getting 2 more 666ms that are the size as the rears and put them on the front. I am running PS4S's all around |
08-03-2022, 10:00 AM | #2 |
Dont listen to me
801
Rep 566
Posts |
I dont think that's ideal since you would be sacrificing things on both ends of the equation.
The front fender/fender liner dimensions really only like to accept up to a 26.3 inch diameter tire. Anything larger than 26.3" is where you start to run into a lot of fender liner rubbing, mainly at the outter 10 o'clock, 2 o'clock positions, directly in front of the tire, and then at full turning radius. Adding a 285mm and rear wheel as a front tire puts you at 26.8 mm which, depending on your ride height will rub or realllly rub, while reducing turning radius. You also will have to add a 20mm wheel spacer and wheel studs which makes things so tight up front you will have to run extra camber. Going with a 265mm as a rear tire to match the front tire is only reducing grip, which is already pretty bad on these cars based on their torque curve. Using a 9 inch front wheel on the rear will make the 'new' wheel stick inward 2 mm more than a normal 10" wide rear wheel would be sitting so wheel offset isnt a problem like it is using a 10" wide 285 tire on the front axle. It seems like a lot of cons for the one pro of saving a little money on tires. |
Appreciate
2
TractionControlDelete4595.50 ddas211.00 |
08-03-2022, 10:59 AM | #3 | |
Enlisted Member
23
Rep 45
Posts |
Great Call out! Thanks
Quote:
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
rotating, rotation, setup, squared, wheels |
|
|