AP 9660 bbk PFC pads

gmx · 09-19-2023, 06:14 PM

Quote:

Originally Posted by FaRKle!

Here's some pics of my DS3.12 pad. Doesn't look like NRS to me.

It looks like copper, did you run them down further or replace? I have DSUno with 18.8mm thick pad, 8mm material left and it's already appearing. If that's "worn" at 63%, value is crap.

FaRKle! · 09-19-2023, 07:47 PM

Quote:

Originally Posted by gmx

It looks like copper, did you run them down further or replace? I have DSUno with 18.8mm thick pad, 8mm material left and it's already appearing. If that's "worn" at 63%, value is crap.

I'm still running them. No issues with cracking/delaminating.

gmx · 09-20-2023, 06:12 PM

I called Ferodo distributor and while they were surprised it was rivetted, it should be fine as it's a softer material than the rotor or friction compound. Usually it's a brass-like material. Apparently most Pagid pads are also rivetted. Good to know. Although, I might have to replace mine anyway due to glazing.

Track/S · 09-21-2023, 09:10 AM

Quote:

Originally Posted by gmx

I called Ferodo distributor and while they were surprised it was rivetted, it should be fine as it's a softer material than the rotor or friction compound. Usually it's a brass-like material. Apparently most Pagid pads are also rivetted. Good to know. Although, I might have to replace mine anyway due to glazing.

OEM pads of CCB:

09-20-2023, 06:12 PM	#47
gmx Lieutenant 166 Rep 478 Posts Drives: VO 1M Join Date: Aug 2014 Location: Sydney, AU iTrader: (0)	I called Ferodo distributor and while they were surprised it was rivetted, it should be fine as it's a softer material than the rotor or friction compound. Usually it's a brass-like material. Apparently most Pagid pads are also rivetted. Good to know. Although, I might have to replace mine anyway due to glazing. __________________ Bilstein CS \| Rays ZE40 \| Solid/spherical front / rear. YouTube
	Appreciate 0 Quote