VO Coding GTS EPS

[Slimjim8201]

Trying to get my non-ZCP 2017 M3 switched over to GTS EPS. When VO coding, do I need to do anything else beyond switching the typenschussel to 8S93? Just got an error during FP calc about missing elements. I'm on 502 for what its worth.

Correction: Looks like it should be 4S93 and not 8S93. Anything else beyond this and swapping F080 to F082?

[bracer]

That's it.

[MyFragileHalogen]

If you look at this thread: http://f80.bimmerpost.com/forums/sho...1352845&page=2

It seems like you don't need to VO code. They say just changing "Variantencodierung Normal" value in EPS module will do it. It worked for me as well, although I am not sure if it's really complete.

[Slimjim8201]

Originally Posted by MyFragileHalogen

If you look at this thread: http://f80.bimmerpost.com/forums/sho...1352845&page=2

It seems like you don't need to VO code. They say just changing "Variantencodierung Normal" value in EPS module will do it. It worked for me as well, although I am not sure if it's really complete.

Interesting. I took the VO sledgehammer approach. Tough to really tell what changed since I’m currently running 245 Hakkas all around but my initial impression is positive. Slowly unwinding out of a corner used to result in a stepper motor like feeling. I could feel the steering load in increments instead of a smooth decreasing load. That effect is definitely gone.