Bootmod3 custom Burbles variations

[BuLoOoSki]

Hey Guys, have been testing different burble setups with proTUNING Freaks for sometime now. Currently as most of you know there are two variants offered: GTS burbles and aggressive/gunshot burbles. The GTS burbles are nice and all, but for those with stock exhaust it can be pretty quiet. Personally, I don't hear much going on with the GTS burbles if I'm driving over 35mph. So we developed a variant that sounds (the rhythm) very similar to GTS burbles except their slightly louder (still no where near gunshots) and slightly more aggressive in the higher RPMs.

The video below is a comparison of two different versions tested while revving, driveby, and downshifting. Both of these versions will most likely be preset setups available as part of the burbles slider (soon to come), but we're trying to figure out which of these two people prefer to make it the default OTS setup.

P.S. I understand some prefer no burbles and others prefer Gunshot burbles, but for this poll we're just trying to figure out which of these two people prefer.

Update:
Given the poll results and the huge preference for V2 burbles, V2 burbles will be the default burble setup on all future updates.
Thanks guys for participating in the poll.

[AGM_m3f80]

V2 burbles

[BuLoOoSki]

Originally Posted by AGM_m3f80

V2 burbles

Awesome

I'd appreciate it though if you can vote using the poll above, its easier than counting everyones post

[chewbakam4]

V2 for me as well for sure. I had my speakers full blast to hear this HAHA what exhaust setup are you running?

[BuLoOoSki]

Originally Posted by chewbakam4

V2 for me as well for sure. I had my speakers full blast to hear this HAHA what exhaust setup are you running?

Awesome man!

Yeah it's better to listen using a laptop/desktop to hear it properly, your phone wont show the difference clearly. It was shot using a GoPro Hero 3+, not the best cam/mic setup
I'm running stock exhaust + Eisenmann catless downpipes

[euro*]

What if I have stock zcp burbles already, how will it work after I get a tune from PTF?

[Rydinsmoothx]

V2. Can I send a request to get this now?

[cobbyy]

V2 for sure. If you want burbles, go all out and get loudest and longest burble possible IMO.

[NorCal f80]

cant wait for the burble aka something sounds wrong with my car fad to be over with. its embarrassing when people ask if mine sounds like others they hear. good thing there are no ricer flame tunes.

[Elementality]

V2

[BuLoOoSki]

Originally Posted by Rydinsmoothx

V2. Can I send a request to get this now?

Nope, I'd wait just a few more days till everything is finalized

[whoop_ass]

Originally Posted by NorCal f80

cant wait for the burble aka something sounds wrong with my car fad to be over with. its embarrassing when people ask if mine sounds like others they hear. good thing there are no ricer flame tunes.

Hahahhah!!
I second that and can't fathom what the big deal with this is!

but hey bootmod3 is just doing what people request, maybe i just think meh.. about burbles

if anything ZCP is perfect if I had to have.

But good job getting this dialed in BuloOski

[guess2098]

I just flash to bm3 last week. I think the stock 18 zcp is giving better burble. For some reason bm3 at gear 3 4 5 6 doesn't give burble but 18 zcp does. (Both have fake sound ASD disabled)

[chewbakam4]

Mine is on older BMW software and if you turn off active sound you’ll lose burble too. I think its tied into all tye sound tuning if you look in the BM3 map editor.

[SanchoDivine]

That's it, I'm gonna do BM3 come tax time in a few months! I like the burbles but dont want it to be gun shot embarrassing. I have an MPE without the secondary cats, may even get downpipes too but don't want to be ridiculous with the noise. I am assuming V1 would be more my preference but the V2 is sounding pretty good too.

Edit: After listening again, I think V2 is the one!

[EcHo714]

I currently have MSR intakes installed and after the latest OTS stage 2 update I lost a lot of intake sound during my downshifts. Would this issue be caused by exhaust burbles or something else? My previous flash had very aggressive downshifts so you can hear the intakes pretty loud but now it's muffled and I don't really hear anything.

[GlazierGlaze]

V2. When can I get this pushed as an update to my current flash?

[BuLoOoSki]

Originally Posted by guess2098

I just flash to bm3 last week. I think the stock 18 zcp is giving better burble. For some reason bm3 at gear 3 4 5 6 doesn't give burble but 18 zcp does. (Both have fake sound ASD disabled)

There are two things that could be causing this:

1. Disabling ASD seem to interfere with burbles.
2. I think the maps from last week might have had speed a low speed cutoff, 36kmh. This has been updated since. Check while driving see at what speed do u stop having burbles.

[BuLoOoSki]

Originally Posted by SanchoDivine

That's it, I'm gonna do BM3 come tax time in a few months! I like the burbles but dont want it to be gun shot embarrassing. I have an MPE without the secondary cats, may even get downpipes too but don't want to be ridiculous with the noise. I am assuming V1 would be more my preference but the V2 is sounding pretty good too.

Edit: After listening again, I think V2 is the one!

[BuLoOoSki]

Originally Posted by whoop_ass

Hahahhah!!
I second that and can't fathom what the big deal with this is!

but hey bootmod3 is just doing what people request, maybe i just think meh.. about burbles

if anything ZCP is perfect if I had to have.

But good job getting this dialed in BuloOski

Thanks man P.S. your voice has been heard, LOUD and CLEAR

[BuLoOoSki]

Originally Posted by EcHo714

I currently have MSR intakes installed and after the latest OTS stage 2 update I lost a lot of intake sound during my downshifts. Would this issue be caused by exhaust burbles or something else? My previous flash had very aggressive downshifts so you can hear the intakes pretty loud but now it's muffled and I don't really hear anything.

Can your elaborate more on what you mean by the statement I've highlighted in bold?

I wouldn't think burbles would have anything to do with it. Tuning the burbles is mostly changing the timing and fuel tables. So I'm not sure how that can affect your downshifts and intake suction noise.

It could be very simple as your intake filters needing some cleaning

[BuLoOoSki]

Originally Posted by GlazierGlaze

V2. When can I get this pushed as an update to my current flash?

Will be posting here when and if it becomes available. Will all depend on the vote results. So far it looks like most people like V2