Sparta Triton BBK nickel plated

[mhjeep]

BIMMERPOST / Classifieds

Asking Price:

Sold

Or Best Offer

Location:

✓ Will Ship

Item Interest

Selling my Sparta Triton BBK front and rear brakes. Have about 10k street miles on them. Only done one track day with 4 sessions. Did fantastic. They were purchased used from a vendor who used them for shows but the calipers were refinished with nickel plating from manufacturer so they were like new when received.

This calipers on this kit are lighter than the stock 4 pot / 2 pot blue system. The thicker 380 mm rotors are slightly heavier than the rear 370 mm stock rotors.

Specs: Also includes Goodridge SS lines.

The specs are 380x34 both front and rear and the calipers are 6 pot front / 4 pot rear.

Weights:
Front 6 piston caliper: 10lbs 1.8oz
Front rotor fully assembled: 24lbs
Rear 4 piston caliper: 7lbs 8oz
Rear rotor fully assembled: 24lbs

Has about 60-70% pad left on Hawk HPS5.0. Also includes Hawk DCT30 track pads which were only used once for bedding by vendor, never used by me.

Still have most of original packaging except one box for one if the discs is a little worn out.

Also this company is based in Seattle and they have also been extremely responsive and helpful with any question or support I might have or need.

You can search this forum or BMW Blog as there was a good write up review on them from EAS. Very high quality.

Price is $3000 obo. New these cost around 8k. Selling as I'm putting car back stock.

[mhjeep]

Bump

[faizaan2000]

Do you know if these require the caliper to be removed for pad swaps?

[mhjeep]

According to Sparta, you don't need to remove the caliper on the rears. On the fronts, you have two options for pad swaps. You can either remove the caliper or the bridge to swap the pads.

[mhjeep]

Putting these back up for sale.

[mhjeep]

Bump

[aBMWfan]

Originally Posted by mhjeep

Bump

Holy cow these have been posted on here by you and the vendor for as long as I can remember. GLWS

[mhjeep]

I had posted them long time ago but then ended up getting another F80 so I kept them for the new car. I had listed them as sold but decided to use old post simply because it was easier. That's why original post date is so old.

They are great brakes. Just don't need them anymore.

[nogaroblue]

PM'd you.

[mhjeep]

Updated pics:

Also measured rotor thickness with digital caliper.

Both fronts are at 33.6mm
Both rears are at 33.9mm

[mhjeep]

Bump.

Buyer fell through.

Someone buy these before I decide to put them back on my car.