*Downpipe+Intake+Chargepipe Combo* Introducing our M3 / M4 Power Packs

[SSR Performance]

Hello everyone!

We would like to introduce our all new S55 Power pack!

Our engineers have worked hard putting each and everyone one of these products through rigorous R&D to optimize flow and increase horsepower. You will notice detailed and unique design improvements in various different areas of our solutions. Each and every part has been installed and run on our shop M3 and M4 for the past 9 months including test cycles on both the dyno and the track. Fitment, longevity, and looks have all been optimized to the absolute best of our best abilities. We offer a 100% Hassle-Free Lifetime Warranty against any manufacturer defects whatsoever on all products under our brand name.

M3 / M4 CATLESS RACE-SPEC DOWNPIPES



An Up-Close look at SSR Performance Downpipes

• Every single set of downpipes is fitted to the same EXACT, proven, jig to guarantee, direct bolt-on, perfect fitment every time

• Our downpipes are crafted using ONLY certified 304 Stainless Steel that is then hand TIG welded by our Certified Professional TIG Welder right here in Orange County, CA

• Completely precision CNC machined mono-block lipless / stepless V-band flange transition design

• 20 -35 HP/TQ gains dyno tested with improved response

• No Hassle LIFETIME warranty




M3 / M4 DUAL CONE INTAKES



An Up-Close Look at SSR Performance Dual Cone Intakes

• Our contained design keeps the intake filters inside the engine bay where they are safe from unfavorable external elements like dust and water

• Our custom made stainless steel micro-mesh filters paired with an aluminum body design create a very noticeable unique sound that cannot be achieved with traditional style intakes

• Gains of 12+ horsepower after the initial adaptation period

• Engineered, tested, and built in Orange County, CA

• Our precision CNC machined MAF housing is scaled to ensure a smooth idle




M3 / M4 DUAL ALUMINUM CHARGEPIPES



An Up-Close Look at SSR Performance Chargepipes

• Our reinforced aluminum designed chargepipes replace the weak stock plastic ones. Whereas the stock chargepipes tend to crack at the thin walled flange to chargepipe transition, our new version is guaranteed not to fail.

• Our custom CNC machined flange has been tested to ensure an air-tight fit even under high boost conditions. Our chargepipes will never leak!

• All of our chargepipes come with optional use ⅛” NPT methanol bungs for use with most M3 / M4 methanol kits on the market

• Engineered, tested, and built in Orange County, CA

• All hardware, silicone couplers and clamps necessary for install are included



Please visit our post in the Vendor Classifieds section for pricing and a link to order! Click link to go to our Classifieds thread now!
http://f80.bimmerpost.com/forums/sho....php?t=1308710


Please don't hesitate to contact us at info@SSR-Performance.com for any questions you may have. You can also call us at (800) 438-2808. Thank you for your time!

[Jiaim]

Amazing prices for the craftmanship

[SSR Performance]

Originally Posted by Jiaim

Amazing prices for the craftmanship

Thank you sir!! We really appreciate the kind words. Glad to know our meticulous work doesn't go unnoticed.

[EALm4]

Those welds look sexy

[M3kingz]

Lol looks like copies of er downpipes & chargepipes as well as a copy of bms intakes

[Jiaim]

Originally Posted by M3kingz

Lol looks like copies of er downpipes & chargepipes as well as a copy of bms intakes

these use brakets, bms not

embossed edges for silicone boots, bms not

can't speak about filters quality but the tube part from SSR has better engineering.

[EALm4]

Any way to get the charge pipes in a flat matte color?

[rmizzle101]

Definitely jumping on this!

[SSR Performance]

Originally Posted by M3kingz

Lol looks like copies of er downpipes & chargepipes as well as a copy of bms intakes

None of our parts are copies of any other brands. They are a product of months and months of hard work that we have put in. As far as the downpipes go, we don't know of any other brand using a precision designed monoblock step-less / lip-less turbo to V-band transition and / or our O2 bung locations. Also, in reference to the intake comment, there are plenty of obvious differences by just merely taking a look at the photos side by side.

It is important note that when it comes to aftermarket parts on most vehicles, the design differences are usually extremely minor from brand to brand. This doesn't go to say that the parts are copies, but rather is a product of the inevitable coincidences caused by the extremely limited space in which these parts are being placed (even more so when it comes to BMW's). At the end of the day all of our parts are designed to fit perfectly every time, and that is exactly what they do. I hope this addresses your concerns! Thanks.

Originally Posted by Jiaim

these use brakets, bms not

embossed edges for silicone boots, bms not

can't speak about filters quality but the tube part from SSR has better engineering.

Thank you for clearing this up!! You have a keen eye for details. At the end of the day its the small details that matter

[SSR Performance]

Originally Posted by EALm4

Any way to get the charge pipes in a flat matte color?

Yes, we can most definitely get that done for you. I'll go ahead and shoot you a PM now!

Originally Posted by ramzinajdawi

Definitely jumping on this!

Awesome!! Give us a shout when you place your order!

[Snapp]

So I just put in my order for the powerpack 3 a few hours ago and I don't even have my car yet, is that wrong? lol seriously though these look like great products especially for the price. You guys mighta just saved me a nice hunk of change. Really looking forward to this

[SSR Performance]

Originally Posted by Snapp

So I just put in my order for the powerpack 3 a few hours ago and I don't even have my car yet, is that wrong? lol seriously though these look like great products especially for the price. You guys mighta just saved me a nice hunk of change. Really looking forward to this

Hahaha!! Nothing's wrong when it comes to buying car parts you can never be too prepared! Thank you very much for the kind words!!! That is precisely what we set out to do.

[SSR Performance]

For everyone that's been wanting to see! We have photos of the Fashion Grey installed on our M3! Here they are for you:





Let us know if you have any questions at all! You can email us anytime at info@SSR-Performance.com

[V3rbatim]

Any idle issues with the intake on?

[SSR Performance]

Originally Posted by V3rbatim

Any idle issues with the intake on?

No sir! There will be a short adaptation period of about 3 days, but even in that period you should not notice any kind of issues with idle whatsoever.

[SSR Performance]

Just finished fitting a set of our Dual Cone Intakes on an F80 post member's beautiful beast! Don't think there is a more appropriate color for our shop than this individual Java Green Downpipes and chargepipes going on as soon as they are out of production!

[JamesGames]

How is the metal mesh filter filtration vs a traditional cone filter?

[EALm4]

Originally Posted by SSR Performance

Just finished fitting a set of our Dual Cone Intakes on an F80 post member's beautiful beast! Don't think there is a more appropriate color for our shop than this individual Java Green Downpipes and chargepipes going on as soon as they are out of production!

whoa that green is HOTTTTTTTT

[SSR Performance]

Originally Posted by JamesGames

How is the metal mesh filter filtration vs a traditional cone filter?

The stainless steel micro-mesh filters are 100% as sufficient as any traditional filter would be. This is not the first application for stainless steel filters. Similar style filters have been used in many applications from various brands on different models of vehicles over the past years. They are easy to clean (just wipe) and create a much more aggressive sound. Overall, your motor is able to breathe more efficiently as well, creating a noticeable increase in power.

[SSR Performance]

Originally Posted by EALm4

whoa that green is HOTTTTTTTT

Yup! That green was awesome. Even better in person!!

[YangEnterprise]

Thank you Shah and Zayn for everything! Full review up!

http://f80.bimmerpost.com/forums/sho...1#post20669871

[F80_M]

Can you PM price of just the chargepipes.