Exhaust clamps for midpipe to rear

nyc f82 · 02-21-2018, 08:38 PM

Does anyone know the size of the exhaust clamps used to put the oem FACTORY midpipe back with the oem rear muffler? The exhaust has been cut due to having a aftermarket midpipe installed.
Thanks for the help.

f80er · 02-21-2018, 09:09 PM

Just measure the width of the pipe and order torca clamps on Amazon.

nyc f82 · 02-21-2018, 09:27 PM

Quote:

Originally Posted by f80er

Just measure the width of the pipe and order torca clamps on Amazon.

The exhaust isn’t off the car, and I don’t have the factory midpipe at the moment to do that.

kerkiraios00 · 02-21-2018, 09:32 PM

What's kind of midpipe you taking off?

FriedPiston · 02-22-2018, 12:52 AM

AA midpipes come with 65mm clamps or 2.55", so you can start with that size.

Here's one for reference:
http://www.bimmerworld.com/Exhaust/E...101745427.html

nyc f82 · 02-22-2018, 08:08 AM

Does anyone know the size of the stock exhaust piping?

f80er · 02-22-2018, 08:51 AM

Quote:

Originally Posted by nyc f82

Does anyone know the size of the stock exhaust piping?

3" back by the cats (far end of mid pipe towards front of the car). But like nars3000 said 2.5" back by the muffler? Clamps are cheap so but 3 and 2/5 and see what works.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

https://www.amazon.com/dp/B077GP8DRQ...&pd_rd_w=l310z

MisterF80M3 · 09-29-2018, 05:41 PM

Quote:

Originally Posted by f80er

3" back by the cats (far end of mid pipe towards front of the car). But like nars3000 said 2.5" back by the muffler? Clamps are cheap so but 3 and 2/5 and see what works.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

https://www.amazon.com/dp/B077GP8DRQ...&pd_rd_w=l310z

Has anyone tried if this worked? I can buy the clamps from ECS but it will cost 2 times more and delivery is significantly slower than Amazon prime.

golfinz · 09-30-2018, 08:48 AM

PN: 18307536426

You’ll also need two gaskets from the dp to the mid pipe. PN 18307851168

MisterF80M3 · 09-30-2018, 05:53 PM

Quote:

Originally Posted by golfinz

PN: 18307536426

You’ll also need two gaskets from the dp to the mid pipe. PN 18307851168

Would this work too? It is 65mm also and a whole lot cheaper.

https://www.ecstuning.com/b-uro-part...SABEgKhtvD_BwE

02-21-2018, 08:38 PM	#1
nyc f82 Second Lieutenant 57 Rep 239 Posts Drives: AW F82 M4 Join Date: May 2016 Location: NYC iTrader: (0)	Exhaust clamps for midpipe to rear Does anyone know the size of the exhaust clamps used to put the oem FACTORY midpipe back with the oem rear muffler? The exhaust has been cut due to having a aftermarket midpipe installed. Thanks for the help.
	Appreciate 0 Tweet Quote

02-21-2018, 09:09 PM	#2
f80er Banned 2056 Rep 1,984 Posts Drives: An M3 Join Date: Jan 2016 Location: DMV iTrader: (1)	Just measure the width of the pipe and order torca clamps on Amazon.
	Appreciate 0 Quote

02-21-2018, 09:32 PM	#4
kerkiraios00 Major 246 Rep 1,373 Posts Drives: '18 F80 MW M3 Join Date: Dec 2011 Location: Queens, New York iTrader: (0)	What's kind of midpipe you taking off? __________________ 2018 F80 M3 ZCP Mineral White- Extended Shakir Orange - Full Suntek Ultra Wrapped - ///M Performance Spoiler - RKP Front Lip - RKP Side Skirts - Vorsteiner GTS Diffuser -AA Mid-Pipe-///M performance HAS kit - HRE P101 11 E90 M3 JEREZ BLK METALLIC ZCP SOLD
	Appreciate 0 Quote

02-22-2018, 12:52 AM	#5
FriedPiston Colonel 1973 Rep 2,711 Posts Drives: Scraper Join Date: Oct 2013 Location: East Oakland, CA iTrader: (26)	AA midpipes come with 65mm clamps or 2.55", so you can start with that size. Here's one for reference: http://www.bimmerworld.com/Exhaust/E...101745427.html
	Appreciate 1 SanchoDivine553.50 Quote

02-22-2018, 08:08 AM	#6
nyc f82 Second Lieutenant 57 Rep 239 Posts Drives: AW F82 M4 Join Date: May 2016 Location: NYC iTrader: (0)	Does anyone know the size of the stock exhaust piping?
	Appreciate 0 Quote

09-30-2018, 08:48 AM	#9
golfinz Captain 235 Rep 759 Posts Drives: Tanzanite M3 Join Date: Apr 2009 Location: usa iTrader: (3)	PN: 18307536426 You’ll also need two gaskets from the dp to the mid pipe. PN 18307851168
	Appreciate 1 MisterF80M31047.00 Quote