Quote:
Originally Posted by trdmrs1993
Installed it on Friday night, had fun with it for a night and it stopped working Before it stops working, my friend and I were sitting inside the car trying to update the firmware. We tried all the COM 1-30 and it doesn't connect to my PC, as soon as we tried COM 29 or 30 the drivetrain malfunction pop out and couldn't turn on the JB4 anymore. NO WIRE TOUCHED!! Spoke to terry and he said it might be the firmware got deleted. So I tried another 2 PC and usb cable still couldn't connect the JB4 to PC, and there is no way I can upload the firmware. So wired that I couldn't connect it to PC but the firmware got deleted?
PLEASE HELP!!!!!!!!!!!!!!!!! Very without the JB
|
If you're in contact with BMS / Terry I would just keep them in the loop and they will fix your issue. Nobody here can be of better help then BMS themselves. IF you can't connect into your JB4 then there is no way to flash the firmware back on it.
I would double check all connections and make sure there is power going to the unit (car on, etc.)
Worst case you will need to send the JB4 back to BMS.
Mike