F80 M3/M4 Competition Package ZCP 666M with Spacers Pics

[alternatesandman]

Originally Posted by FLA997

Just put 15F/12R on today, but I think the 15 all around may look a bit better based on some of the other pics in this thread..in any case, much better than without any spacing.

Side Profile Before & After:

WOWWW sooo pretttyyyyy .

Is this lowered at all? Any rub? I've got a YMB M3 ZCP and I need to figure out what to do. I've been debating between the 12/10 or 15/12. I just don't want any rubbing if I put on the H&Rs. Any idea if this will effect my drivability in any way?

[CH_M3f80]

Shmelgy
It looks like you have a lot of experience with spacers.
I drive a M3 F80 Competition LCi II with standard M666 wheels.
What is the maxium spacer i can Install with stock suspension, no negativ chamber, etc.?(Everything stock) Of course no rubbing.
12f/15r or 15f/15r or 15f/17.5r?
In case of with performance or KW HAS same question. Maximum spacer?, no negativ chamber (stock), no rubbing.

In case i drive very simple and not a lot of time agressive. I have not often passengers begind me.

Thx

[Shmelgy]

Originally Posted by CH_M3f80

Shmelgy
It looks like you have a lot of experience with spacers.
I drive a M3 F80 Competition LCi II with standard M666 wheels.
What is the maxium spacer i can Install with stock suspension, no negativ chamber, etc.?(Everything stock) Of course no rubbing.
12f/15r or 15f/15r or 15f/17.5r?
In case of with performance or KW HAS same question. Maximum spacer?, no negativ chamber (stock), no rubbing.

In case i drive very simple and not a lot of time agressive. I have not often passengers begind me.

Thx

Hey, sorry about the full inbox, cleared it out a bit. On stock suspension, I had 12f and 15r. The rear seemed fine but the front could have used a 15 and been fine. 18 might have pushed a bit too much

[CH_M3f80]

Originally Posted by Shmelgy

Hey, sorry about the full inbox, cleared it out a bit. On stock suspension, I had 12f and 15r. The rear seemed fine but the front could have used a 15 and been fine. 18 might have pushed a bit too much

Hey!

No problem! Thanks for info..
And the setup 12f/15r or 15/f/15r also would work with performance or kw has? with No rubbing and no negative chamber?

[bmwf80m3]

here are more pics of my M3 with 666M and Spacers !!!

[bholler]

Originally Posted by bmwf80m3

here are more pics of my M3 with 666M and Spacers !!!

LOOKS GREAT!

[bmwf80m3]

Originally Posted by bholler

LOOKS GREAT!

Thank you, just like your M3 !!!

[Josh_F82]

Originally Posted by CH_M3f80

Hey!

No problem! Thanks for info..
And the setup 12f/15r or 15/f/15r also would work with performance or kw has? with No rubbing and no negative chamber?

I'm contemplating something similar. I already have HR springs for lowering and 15mm spacers for all four sides...they just aren't installed yet (planned on doing it next weekend). I'm jus contemplating if I should keep the 15mm all the way around, or get rid of one set of 15s and get a set of 12s for the rear. Instead of running 15f/15r it'd be 15f/12r.

Thoughts on 15f/15r vs 15f/12r? Any rubbing issues with aggressive driving on 15s all the way around? It'd make my life easier installing what I have, but I want to make sure its right...so if I have to get rid of 15s for the rear... so be it.

[Sullivanm3]

Ms springs and 15f and 12r ms spacers

[M 3Rilla]

MP HAS MS 10's all the way around dropped to BMW recommended height.

[houstonT]

Who are you guys getting your M Performance HAS kit from? Does the kit specify the BMW recommended drop amount? What is the drop amount BMW recommends?

[espressoo]

Originally Posted by M3NACE M

I've always wondered... there is a reason BMW engineers don't bring the wheels that far out.... why?

We all agree that a car with spacers looks way better..!

My guess would be aerodynamics. Take a look at nascars, their wheels/tires are tucked. Every bit helps to improve the mpg ratings to sell cars at the sacrifice of appearance.

[kerkiraios00]

Originally Posted by M 3Rilla

MP HAS MS 10's all the way around dropped to BMW recommended height.

whats the price on the mp has kit? any advantages over aftermarket?

[M 3Rilla]

Originally Posted by houstonT

Who are you guys getting your M Performance HAS kit from? Does the kit specify the BMW recommended drop amount? What is the drop amount BMW recommends?

Purchased my kit from getbmwparts, they're a sponsor on bimmerpost.

Yeah the install instructions include the BMW recommended height adjust, the drop recommended is 20mm f/5 mm r.

https://www.getbmwparts.com/

[M 3Rilla]

Originally Posted by kerkiraios00

whats the price on the mp has kit? any advantages over aftermarket?

Purchased my kit for $1210, getbmwparts had a special in Aug, currently sales for $1260.

Advantages for me, BMW approved, installed and warranted.

The link below contains a ton of info.
http://f80.bimmerpost.com/forums/sho....php?t=1191427

https://www.getbmwparts.com/partloca...catalogid=4462

[Frode D]

Installed 15f and 10r Burger Motorsport spacers yesterday. Lowered on H&R springs.

[LukeM15]

Looks good Frode D

[T1M3LESS]

15/15 (MS)

Rear


Front

[Mistertmac]

Originally Posted by bmwf80m3

looks great , by Moritz Motorsport !!??

Originally Posted by bmwf80m3

looks great , by Moritz Motorsport !!??

Yes!!

[BRM3MIA]

Originally Posted by M 3Rilla

MP HAS MS 10's all the way around dropped to BMW recommended height.

Originally Posted by M 3Rilla

MP HAS MS 10's all the way around dropped to BMW recommended height.

Car looks beautiful! Going the same set up, any issues with the lip so far? I also have a lip and concern if I will have too many issues as a DD. Any rubbing?

[HighlyMedicated]

Originally Posted by W///

Carry's car with 15mm all around and Swift springs. Looks great IMO

I wanted to get swift springs so thats how it look nice. But the i know for sure my mpe front lip would get super jacked up. Hmm what to do lol

[M 3Rilla]

Originally Posted by BRM3MIA

Car looks beautiful! Going the same set up, any issues with the lip so far? I also have a lip and concern if I will have too many issues as a DD. Any rubbing?

Thanks!

No issues with the lip, other than rubbing a hand full of times, mainly due to operator error, it's inevitable I guess. Just gotta take the bad with the good sometimes. Distractions and speed is what got me. But you'll do fine, just take it easy and enjoy the ride.

And remember it's just a piece of plastic.