For Sale: 2018 Built Single Turbo M4 Competition

[arvind.3195]

Price Drop! 950+whp 2018 BMW M4 Competition in Black Sapphire Metallic with 41,000 (Chassis) miles for sale! This F82 M4 is powered by a fully built 3.0L S55 high performance engine that’s coupled with a single G35-1050 turbo linked to a 7-speed M double clutch transmission with upgraded Deka Stage 3 clutches and Clutch Masters lightweight flywheel. Performance upgrades include VRSF top mount intercooler, custom charge pipes, BMP 950cc port injection, Precision Raceworks Stage 4.5 high pressure fuel pump with SNOWPerformance meth injection kit (meth currently turned off), custom downpipes, and a single VRSF single mid-pipe coupled with a Dinan Exhaust. Further equipped with 4x 18” Apex VS-5RS wheels, 4x Nitto NT555R2s, H&R lowering springs, carbon fiber accessories like side skirts, rear diffuser, front lip, and more. Vehicle maintained by @_mpowerhouse, and tuning was handled by @abperformance.co with an estimated output of 650whp on 93, and 800whp on e85 (capable of 950+whp on e85, turned down for street use). There are currently 8,000 miles on the build. Nearly $70,000 (parts & labor) in receipts available on request! Clean title, no accidents, 1 previous owner! Serious inquiries only. No trades.

Factory Options:
Competition Package
Black Sapphire Metallic Exterior
Competition Seats
Carbon Roof
Carbon Interior
Harmon Kardon Premium Sound System
7-Speed M DCT

Engine:
Fully Built 3.0L S55 High Performance Engine
MAHLE PowerPak Piston Kit w/ TBC
Manley H Beam Connecting Rods
Schrick Performance Camshaft - 238/272
High Performance Valve Springs
ACL Race 0.25mm Oversize Main + Rod Bearings
VTT Single Turbo Oil/Fittings
RK Autowerks S55 Billet Pinned Crankhub
Crank Bolt Capture
VTT Crank Bolt Guard
Motul 300V 10W-40 Racing Motor Oil

Single Turbo System:
Garret G35-1050 Single Turbo
VRSF Top Mount Intercooler Upgrade
Custom Charge Pipes
Custom Dump Tube
NGR Turbo Filter
3.5 Bar TMAP Sensor
GenV Hypergate External Wastegate

Fuel System:
BMP 950cc Port Injection
Precision Raceworks Stage 4.5 High Pressure Fuel Pump
SNOWPerformance Meth Injection Kit w/ Gauge
Genuine BMW Spark Plugs
EU6 F10 M5 Injectors
Motiv Re|flex+

Exhaust:
Walton Motorsport Exhaust Manifold
Custom Downpipes
VRSF Single Mid-Pipe
Dinan Axle-Back Exhaust

Drivetrain:
7-Speed M Double Clutch Transmission
Upgraded Deka Stage 3 Clutches
Clutch Masters Lightweight Flywheel
Stage 3 XHp Transmission Tune
Motul Differential Fluid

Cooling:
Mosselman Oil Thermostat
ECS Tuning Oil Catch Can
CTS Heat Exchanger

Wheels & Suspension:
Front - 18x10” ET25 Satin Black Apex VS-5RS; 275/40/R18 NT555R2s
Rear - 18x11” ET44 Satin Black Apex VS-5RS; 305/40/R18 NT555R2s
H&R Lowering Springs

Braking:
OEM BMW Front/Rear Rotors
Hawks Performance 5.0 Brake Pads
Stainless Steel Brake Lines
RBF660 Brake Fluid

Interior:
Carbon Fiber Paddle Shifters
Carbon Fiber Gear Selector
Carbon Fiber E-Brake
Carbon Fiber Trim
Red Start Stop Button
Red M1, M2, Buttons
Wireless CarPlay
Video In Motion Coding
Full Coverage Luxury Mats

Exterior:
Carbon Fiber Front Lip
Carbon Fiber Side Skirts
Carbon Fiber Rear Diffuser
Carbon Fiber Spoiler
5% Tints on Sides/Back
50% Tints on Front
Tinted F/R Reflectors

Price: $89,000 (Or-Best-Offer)
Location: Edison, New Jersey
VIN: WBS4Y9C59JAC87884

[b_w.]

Cool car. Good luck with the sale.

[arvind.3195]

Originally Posted by b_w.

Cool car. Good luck with the sale.

Thank you brother 🙏

[M3SQRD]

Great build.

If you haven’t, you should list this for sale in the Member Classifieds Cars for Sale/Transfer Lease subforum (see link below). GLWS!

https://f80.bimmerpost.com/forums/fo...play.php?f=625

[arvind.3195]

Originally Posted by M3SQRD

Great build.

If you haven’t, you should list this for sale in the Member Classifieds Cars for Sale/Transfer Lease subforum (see link below). GLWS!

https://f80.bimmerpost.com/forums/fo...play.php?f=625

Thank you so much, I will most certainly list it there 🙏

[b_w.]

What turbo manifold are you using?

[arvind.3195]

Originally Posted by b_w.

What turbo manifold are you using?

Whats going on boss, I am using a Walton Motorsport Manifold.

[1dopef80]

Not worth 90k 😂 mods don’t add value

[Wanted_M]

Go build a motor with forged parts and let's see how much that will cost. To me that brings value as the motor is fresh and can take the kitchen sink. I'm sure he will find a buyer that will appreciate what he's done.

[arvind.3195]

Originally Posted by Wanted_M

Go build a motor with forged parts and let's see how much that will cost. To me that brings value as the motor is fresh and can take the kitchen sink. I'm sure he will find a buyer that will appreciate what he's done.

You understand the value my brother 🫡

[G MONEY]

Originally Posted by 1dopef80

not worth 90k 😂 mods don’t add value

🤡🤡