JB4 S55 Stage 3 Connections

[stealth-twntrbo]

Are the Fuel Connector and Wastegate connections only for use on Map 7 for race gas ethanol maps? Or does it also help in map 2?

[///M ARMY]

Originally Posted by stealth-twntrbo

Are the Fuel Connector and Wastegate connections only for use on Map 7 for race gas ethanol maps? Or does it also help in map 2?

map 2 is just a little more aggressive then Map 1. With map 7 you will need the fuel connector and wastegate connections. When running may 7, you can use race gas and or E85/91 mix. I like the E85/91 mix better. Reason being its cheaper ($30 total) vs Race Gas ($100 fill up).

Better fueling always help.

[stealth-twntrbo]

Originally Posted by ///M ARMY

map 2 is just a little more aggressive then Map 1. With map 7 you will need the fuel connector and wastegate connections. When running may 7, you can use race gas and or E85/91 mix. I like the E85/91 mix better. Reason being its cheaper ($30 total) vs Race Gas ($100 fill up).

Better fueling always help.

But the stage 3 connections only come into play on Map 7. They do nothing for map 2

[///M ARMY]

Originally Posted by stealth-twntrbo

But the stage 3 connections only come into play on Map 7. They do nothing for map 2

correct

[ttbullet]

Originally Posted by ///M ARMY

map 2 is just a little more aggressive then Map 1. With map 7 you will need the fuel connector and wastegate connections. When running may 7, you can use race gas and or E85/91 mix. I like the E85/91 mix better. Reason being its cheaper ($30 total) vs Race Gas ($100 fill up).

Better fueling always help.

So can you run e85 mix on map2 without fuel connector?

[Mike@N54Tuning.com]

Originally Posted by ttbullet

So can you run e85 mix on map2 without fuel connector?

The EWG connections are only used on maps 6+ but the fuel mass connection is suggested for map 2 and required for any E85 mixture.

Mike

[TurboSid]

I run e85 on map 7 without the EWG. Still waiting on a go ahead to plug them in. It takes maybe 15-20 minutes to connect them.

Haven't actually contacted terry to see if I should connect them with the latest maps, last time i had them connected was on older firmware.

And in case anyone is wondering I was getting CELs with the EWC connections when I first got the JB4

[stealth-twntrbo]

Originally Posted by TurboSid

I run e85 on map 7 without the EWG. Still waiting on a go ahead to plug them in. It takes maybe 15-20 minutes to connect them.

Haven't actually contacted terry to see if I should connect them with the latest maps, last time i had them connected was on older firmware.

And in case anyone is wondering I was getting CELs with the EWC connections when I first got the JB4

Will the JB4 automatically delete downpipe CEL's?

[///M ARMY]

Originally Posted by stealth-twntrbo

Will the JB4 automatically delete downpipe CEL's?

Set future d to 90 and it will delete the code

[ttbullet]

Do you have to completely undo the overflow tank or just removing the two torx screw is enough to get to the fuel connector with wrench.

[AYF80]

How much power are we getting on a completely stock car with a JB4 on Map 7 with a 93/E85 mix? And what is the required mix ratio?

[///M ARMY]

Originally Posted by ttbullet

Do you have to completely undo the overflow tank or just removing the two torx screw is enough to get to the fuel connector with wrench.

Removing those two screws then you will have enough space

[teamwerx]

Originally Posted by ///M ARMY

Removing those two screws then you will have enough space

Ion think you need to disconnect the line as well

[Vectors2final]

Originally Posted by AYF80

How much power are we getting on a completely stock car with a JB4 on Map 7 with a 93/E85 mix? And what is the required mix ratio?

Interested in this as well.

[ttbullet]

Originally Posted by TurboSid

I run e85 on map 7 without the EWG. Still waiting on a go ahead to plug them in. It takes maybe 15-20 minutes to connect them.

Haven't actually contacted terry to see if I should connect them with the latest maps, last time i had them connected was on older firmware.

And in case anyone is wondering I was getting CELs with the EWC connections when I first got the JB4

What e85 mix are you running on map7? do you have down pipes?

[///M ARMY]

Originally Posted by AYF80

How much power are we getting on a completely stock car with a JB4 on Map 7 with a 93/E85 mix? And what is the required mix ratio?

Supreme powers car made 525 whp and 547 torque with stock exhaust, ER downpipes and jb4 stage 3 map 7 with 91/E85 mix. The mix ratio was about E40. I haven't seen anyone run map 7 without downpipes and better fueling.

[TurboSid]

Originally Posted by ttbullet

What e85 mix are you running on map7? do you have down pipes?

I put in 10gallons of 93 and top off with e85.

I did this for a couple of months stock and about a month ago I got downpipes. All on map 7