Autotalent
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read

Go Back   BMW M3 and BMW M4 Forum > BMW F80 M3 / F82 M4 Technical Topics > DIY and Coding Discussions

Post Reply
 
Thread Tools Search this Thread
      07-01-2016, 01:47 PM   #45
Gabreigns
Major
Gabreigns's Avatar
493
Rep
1,076
Posts

Drives: F3x
Join Date: Jul 2015
Location: USA

iTrader: (0)

Quote:
Originally Posted by thatf30guy
Quote:
Originally Posted by tom @ eas View Post
Coding

Coding is necessary in order to keep errors from appearing when new taillights are installed.

REM Module
REM -> BFD_L_IS_LED: aktiv / Werte=01
REM -> BFD_R_IS_LED: aktiv / Werte=01

REM -> FRA_H_L_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_L_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_R_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_R_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_R_IS_LED: aktiv / Werte=01
REM -> FRA_H_L_IS_LED: aktiv / Werte=01

REM -> NSL_L_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> NSL_R_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> NSL_L_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> NSL_R_WARMUEBERWACHUNG: nicht_aktiv / Werte=00

REM -> RFS_R_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> RFS_L_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> RFS_R_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> RFS_L_WARMUEBERWACHUNG: nicht_aktiv / Werte=00

REM -> RFS_L_IS_LED: aktiv / Werte=01
REM -> RFS_R_IS_LED: aktiv / Werte=01

Install is complete. Please comment and [appreciate] if this guide helped you or if any of the steps need a bit more detailed explanation.
What exactly do the other coding values do? I know FRA_H_L etc. are for the turn signals. What are NSL, BFD, and RFS?
NSL is rear fog lamps.
RFS I believe is for reverse lamps. But I think those are halogen in regular production so not sure why those need to be coded.
BFD are the brake lights.
Appreciate 1
      09-03-2016, 07:52 AM   #46
TommyLights
Colonel
213
Rep
2,602
Posts

Drives: Man
Join Date: Jul 2010

iTrader: (12)

What's the point of the wiring that crimps into the outer tail lights from the inners? I skipped this step and they seem to be fully functional.
Appreciate 0
      09-03-2016, 08:30 AM   #47
te37
Major
te37's Avatar
545
Rep
1,132
Posts

Drives: F80 SS/SO 6MT
Join Date: Jun 2013
Location: ATL

iTrader: (3)

Quote:
Originally Posted by Tomz_M3 View Post
What's the point of the wiring that crimps into the outer tail lights from the inners? I skipped this step and they seem to be fully functional.
Everything works like the video? Hmm....
Appreciate 0
      09-03-2016, 09:48 AM   #48
TommyLights
Colonel
213
Rep
2,602
Posts

Drives: Man
Join Date: Jul 2010

iTrader: (12)

Quote:
Originally Posted by te37 View Post
Everything works like the video? Hmm....
Yep, identical. Odd.
Edit: Nevermind, realized that wire powers the inner part of the turn signal.
__________________
Appreciate 1
te37545.00
      12-06-2016, 10:31 PM   #49
Nadeemp8
First Lieutenant
114
Rep
336
Posts

Drives: 2021 M5C
Join Date: Nov 2016
Location: Austin

iTrader: (1)

Hey there, I was doing some coding tonight and wasn't able to find these under the REM Module. Is there any chance you can provide the folder number under which I can find these individual settings? I.e. 3000, 3070, etc...

Quote:
Originally Posted by tom @ eas View Post
Coding

Coding is necessary in order to keep errors from appearing when new taillights are installed.

REM Module
REM -> BFD_L_IS_LED: aktiv / Werte=01
REM -> BFD_R_IS_LED: aktiv / Werte=01

REM -> FRA_H_L_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_L_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_R_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_R_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_R_IS_LED: aktiv / Werte=01
REM -> FRA_H_L_IS_LED: aktiv / Werte=01

REM -> NSL_L_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> NSL_R_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> NSL_L_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> NSL_R_WARMUEBERWACHUNG: nicht_aktiv / Werte=00

REM -> RFS_R_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> RFS_L_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> RFS_R_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> RFS_L_WARMUEBERWACHUNG: nicht_aktiv / Werte=00

REM -> RFS_L_IS_LED: aktiv / Werte=01
REM -> RFS_R_IS_LED: aktiv / Werte=01

Install is complete. Please comment and [appreciate] if this guide helped you or if any of the steps need a bit more detailed explanation.
Appreciate 0
      12-07-2016, 11:13 AM   #50
tom @ eas
BimmerPost Supporting Vendor
tom @ eas's Avatar
United_States
8056
Rep
18,786
Posts


Drives: BMW
Join Date: Nov 2005
Location: Anaheim, CA

iTrader: (19)

Garage List
2018 BMW i3s  [0.00]
2010 BMW M3  [6.50]
2015 BMW M4  [5.25]
Quote:
Originally Posted by Nadeemp8 View Post
Hey there, I was doing some coding tonight and wasn't able to find these under the REM Module. Is there any chance you can provide the folder number under which I can find these individual settings? I.e. 3000, 3070, etc...
If cut and pasting, make sure there are no spaces at the end of the coding parameters.

Folder numbers are somewhat irrelevant, depending on software version.
__________________
Tom G. | european auto source (eas)
email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22

GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM

Last edited by tom @ eas; 12-07-2016 at 11:54 AM..
Appreciate 0
      12-07-2016, 07:01 PM   #51
Nadeemp8
First Lieutenant
114
Rep
336
Posts

Drives: 2021 M5C
Join Date: Nov 2016
Location: Austin

iTrader: (1)

Hey Tom, Any chance you can guide me as to where to cut and paste this into?

Quote:
Originally Posted by tom @ eas View Post
If cut and pasting, make sure there are no spaces at the end of the coding parameters.

Folder numbers are somewhat irrelevant, depending on software version.
Appreciate 0
      12-07-2016, 07:16 PM   #52
tom @ eas
BimmerPost Supporting Vendor
tom @ eas's Avatar
United_States
8056
Rep
18,786
Posts


Drives: BMW
Join Date: Nov 2005
Location: Anaheim, CA

iTrader: (19)

Garage List
2018 BMW i3s  [0.00]
2010 BMW M3  [6.50]
2015 BMW M4  [5.25]
Quote:
Originally Posted by Nadeemp8 View Post
Hey Tom, Any chance you can guide me as to where to cut and paste this into?
There are a number of guides in the coding forums to reference from. The same steps apply to most modules.
__________________
Tom G. | european auto source (eas)
email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22

GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
Appreciate 0
      12-07-2016, 07:18 PM   #53
Nadeemp8
First Lieutenant
114
Rep
336
Posts

Drives: 2021 M5C
Join Date: Nov 2016
Location: Austin

iTrader: (1)

Hi Tom,
I'm asking as I've referenced these guides and am still not seeing where I should be updating these items. I've been able to successfully code all of the other modules utilizing ESys and the cable I have, so I am comfortable with coding, I just need some more help on this. Any chance you can give me some pointers given I just dropped over $700 on some lights from you guys??

Quote:
Originally Posted by tom @ eas View Post
There are a number of guides in the coding forums to reference from. The same steps apply to most modules.
Appreciate 0
      12-07-2016, 07:25 PM   #54
tom @ eas
BimmerPost Supporting Vendor
tom @ eas's Avatar
United_States
8056
Rep
18,786
Posts


Drives: BMW
Join Date: Nov 2005
Location: Anaheim, CA

iTrader: (19)

Garage List
2018 BMW i3s  [0.00]
2010 BMW M3  [6.50]
2015 BMW M4  [5.25]
Quote:
Originally Posted by Nadeemp8 View Post
Hi Tom,
I'm asking as I've referenced these guides and am still not seeing where I should be updating these items. I've been able to successfully code all of the other modules utilizing ESys and the cable I have, so I am comfortable with coding, I just need some more help on this. Any chance you can give me some pointers given I just dropped over $700 on some lights from you guys??
We're only providing the needed coding changes in this thread, I don't have a step-by-step guide for coding, sorry. Most companies would not publicly post the changes. If you were local to us, we would be more than happy to code for you. Unfortunately, we do not offer coding remotely.

There are existing threads in which you can reference from, or maybe seek someone local to you if additional assistance is needed on the coding portion.
__________________
Tom G. | european auto source (eas)
email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22

GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
Appreciate 0
      12-07-2016, 07:43 PM   #55
Gabreigns
Major
Gabreigns's Avatar
493
Rep
1,076
Posts

Drives: F3x
Join Date: Jul 2015
Location: USA

iTrader: (0)

Quote:
Originally Posted by Nadeemp8 View Post
Hey there, I was doing some coding tonight and wasn't able to find these under the REM Module. Is there any chance you can provide the folder number under which I can find these individual settings? I.e. 3000, 3070, etc...

Quote:
Originally Posted by tom @ eas View Post
Coding

Coding is necessary in order to keep errors from appearing when new taillights are installed.

REM Module
REM -> BFD_L_IS_LED: aktiv / Werte=01
REM -> BFD_R_IS_LED: aktiv / Werte=01

REM -> FRA_H_L_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_L_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_R_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_R_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_R_IS_LED: aktiv / Werte=01
REM -> FRA_H_L_IS_LED: aktiv / Werte=01

REM -> NSL_L_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> NSL_R_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> NSL_L_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> NSL_R_WARMUEBERWACHUNG: nicht_aktiv / Werte=00

REM -> RFS_R_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> RFS_L_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> RFS_R_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> RFS_L_WARMUEBERWACHUNG: nicht_aktiv / Werte=00

REM -> RFS_L_IS_LED: aktiv / Werte=01
REM -> RFS_R_IS_LED: aktiv / Werte=01

Install is complete. Please comment and [appreciate] if this guide helped you or if any of the steps need a bit more detailed explanation.
If they are not under REM they should be under FEM_BODY.
Appreciate 0
      12-08-2016, 10:41 PM   #56
Nadeemp8
First Lieutenant
114
Rep
336
Posts

Drives: 2021 M5C
Join Date: Nov 2016
Location: Austin

iTrader: (1)

Hey folks, did the upgrade today and lights look great. I am encountering an interesting error message though, "Two-stage Brake Lamp Malfunction" on both the Left and Right sides. The lights seem to work fine, no flickering at startup, and brakes light up the outer assemblies and the middle light at the top of the rear window. Any clue what could be wrong? I coded the following:

Add FA HO-Wort = HELC and VO Code REM.

I did not add any of the following, wondering if this may be the reason or if there's something else I need to be concerned with.

REM Module
REM -> BFD_L_IS_LED: aktiv / Werte=01
REM -> BFD_R_IS_LED: aktiv / Werte=01

REM -> FRA_H_L_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_L_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_R_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_R_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_R_IS_LED: aktiv / Werte=01
REM -> FRA_H_L_IS_LED: aktiv / Werte=01

REM -> NSL_L_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> NSL_R_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> NSL_L_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> NSL_R_WARMUEBERWACHUNG: nicht_aktiv / Werte=00

REM -> RFS_R_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> RFS_L_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> RFS_R_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> RFS_L_WARMUEBERWACHUNG: nicht_aktiv / Werte=00

REM -> RFS_L_IS_LED: aktiv / Werte=01
REM -> RFS_R_IS_LED: aktiv / Werte=01

Last edited by Nadeemp8; 12-09-2016 at 09:54 AM..
Appreciate 0
      12-09-2016, 11:40 AM   #57
tom @ eas
BimmerPost Supporting Vendor
tom @ eas's Avatar
United_States
8056
Rep
18,786
Posts


Drives: BMW
Join Date: Nov 2005
Location: Anaheim, CA

iTrader: (19)

Garage List
2018 BMW i3s  [0.00]
2010 BMW M3  [6.50]
2015 BMW M4  [5.25]
Quote:
Originally Posted by Nadeemp8 View Post
Hey folks, did the upgrade today and lights look great. I am encountering an interesting error message though, "Two-stage Brake Lamp Malfunction" on both the Left and Right sides. The lights seem to work fine, no flickering at startup, and brakes light up the outer assemblies and the middle light at the top of the rear window. Any clue what could be wrong? I coded the following:

Add FA HO-Wort = HELC and VO Code REM.

I did not add any of the following, wondering if this may be the reason or if there's something else I need to be concerned with.

REM Module
REM -> BFD_L_IS_LED: aktiv / Werte=01
REM -> BFD_R_IS_LED: aktiv / Werte=01

REM -> FRA_H_L_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_L_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_R_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_R_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_R_IS_LED: aktiv / Werte=01
REM -> FRA_H_L_IS_LED: aktiv / Werte=01

REM -> NSL_L_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> NSL_R_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> NSL_L_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> NSL_R_WARMUEBERWACHUNG: nicht_aktiv / Werte=00

REM -> RFS_R_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> RFS_L_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> RFS_R_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> RFS_L_WARMUEBERWACHUNG: nicht_aktiv / Werte=00

REM -> RFS_L_IS_LED: aktiv / Werte=01
REM -> RFS_R_IS_LED: aktiv / Werte=01
There is no need to modify VO. Remove HELC, recode REM and make the changes as listed above.
__________________
Tom G. | european auto source (eas)
email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22

GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM

Last edited by tom @ eas; 12-09-2016 at 11:50 AM..
Appreciate 0
      12-09-2016, 11:58 AM   #58
Nadeemp8
First Lieutenant
114
Rep
336
Posts

Drives: 2021 M5C
Join Date: Nov 2016
Location: Austin

iTrader: (1)

Allright folks, looks like I got everything set and now have no error messages and a beautiful set of lights on the car. Since it took me a few tried I figured I'd post up the process that helped me so as to help any others who decide to take on this awesome upgrade.

1) Install lights as per Tom's initial write up
2) Coding will need to be done as follows, with step a performed and coded before proceeding to step b
a) Add FA HO-Wort = HELC and VO Code REM.
b) Go into REM Module, under folder 3061 (LceOutputChannels) you'll find the following that needs to be changed

REM -> BFD_L_IS_LED: aktiv / Werte=01
REM -> BFD_R_IS_LED: aktiv / Werte=01

REM -> FRA_H_L_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_L_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_R_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_R_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_R_IS_LED: aktiv / Werte=01
REM -> FRA_H_L_IS_LED: aktiv / Werte=01

REM -> NSL_L_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> NSL_R_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> NSL_L_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> NSL_R_WARMUEBERWACHUNG: nicht_aktiv / Werte=00

REM -> RFS_R_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> RFS_L_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> RFS_R_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> RFS_L_WARMUEBERWACHUNG: nicht_aktiv / Werte=00

REM -> RFS_L_IS_LED: aktiv / Werte=01
REM -> RFS_R_IS_LED: aktiv / Werte=01

Once you've done this you should have a set of LCI tail lamps on your F80 that do not flicker when turned on and no error messages on your dash!
Appreciate 0
      12-09-2016, 12:03 PM   #59
Nadeemp8
First Lieutenant
114
Rep
336
Posts

Drives: 2021 M5C
Join Date: Nov 2016
Location: Austin

iTrader: (1)

Quote:
Originally Posted by tom @ eas View Post
There is no need to modify VO. Remove HELC, recode REM and make the changes as listed above.
Hi Tom,
When I tried to find the settings you had listed to be changed I did not see them pop up in the REM module until I added HELC and re-coded the FEM module. Either way I am up and running 100% now, posted up what I did in case someone else runs into a similar issue.
Appreciate 0
      01-25-2017, 08:51 PM   #60
tom @ eas
BimmerPost Supporting Vendor
tom @ eas's Avatar
United_States
8056
Rep
18,786
Posts


Drives: BMW
Join Date: Nov 2005
Location: Anaheim, CA

iTrader: (19)

Garage List
2018 BMW i3s  [0.00]
2010 BMW M3  [6.50]
2015 BMW M4  [5.25]
Quote:
Originally Posted by RoadRunner///M View Post
This wire gets fairly crushed in this hole as the light uses that hole as a secure point .. Not an issue over time as the insulation wears?

Also not sure the light fits 100% flush as the blue wire obstructs fitment somewhat?
There is enough clearance for the guide pin and wire.
__________________
Tom G. | european auto source (eas)
email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22

GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
Appreciate 1
      02-11-2017, 03:17 AM   #61
Wes0310
New Member
Wes0310's Avatar
Germany
1
Rep
26
Posts

Drives: BMW M4
Join Date: Dec 2014
Location: Germany

iTrader: (0)

Is this also possible for the new M4 LCI with LED backlights ?
Appreciate 0
      02-11-2017, 11:14 AM   #62
tom @ eas
BimmerPost Supporting Vendor
tom @ eas's Avatar
United_States
8056
Rep
18,786
Posts


Drives: BMW
Join Date: Nov 2005
Location: Anaheim, CA

iTrader: (19)

Garage List
2018 BMW i3s  [0.00]
2010 BMW M3  [6.50]
2015 BMW M4  [5.25]
Quote:
Originally Posted by Wes0310 View Post
Is this also possible for the new M4 LCI with LED backlights ?
Won't know until the MY18 M4s are released. Should be similar, we'll release a M4 specific DIY when available.
__________________
Tom G. | european auto source (eas)
email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22

GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
Appreciate 0
      03-04-2017, 02:16 PM   #63
MCanadaE46
Private First Class
150
Rep
163
Posts

Drives: BMW M3 F80
Join Date: May 2015
Location: Toronto, Canada

iTrader: (0)

Just completed this install. Thanks for the write-up - very easy to follow.

These LCI Tails look great!
Appreciate 1
tom @ eas8056.00
      05-30-2017, 12:53 PM   #64
waqas1988
New Member
1
Rep
18
Posts

Drives: 2014 BMW 335i Msport
Join Date: Nov 2013
Location: United States

iTrader: (0)

2014 335i Msport

Quote:
Originally Posted by tom @ eas View Post
Replying via PM since this is non-M related question.
I wanted to ask if I could get these in my 2014 335i Msport. Is there a plug-and-play method to do this without having to code? iND seems to have a plu and play wiring harness for sale along with the lights...would that work?

Thanks!
Appreciate 0
      07-03-2017, 11:31 AM   #65
te37
Major
te37's Avatar
545
Rep
1,132
Posts

Drives: F80 SS/SO 6MT
Join Date: Jun 2013
Location: ATL

iTrader: (3)

You guys should do a retrofit for the LED headlights also! Im sure there is a market out there for it.
Appreciate 0
      02-11-2018, 03:13 PM   #66
allinon72
Brigadier General
allinon72's Avatar
United_States
4892
Rep
3,783
Posts

Drives: 20' M2C, 23' X1
Join Date: May 2017
Location: Indianapolis, IN

iTrader: (2)

Anyone do all the coding changes with Bimmercode? Pretty sure it's not a problem, but wanted to confirm.
Appreciate 0
Post Reply

Bookmarks

Tags
f80, harness, lci, tail light, taillight

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:56 AM.




f80post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST