After market version of these ?

[drgmt]

Can anybody tell if there is someone making an aftermarket version of these front flicks?

BMW OEM M-Performance Carbon Fiber DTM Bumper Wings Set M3 M4 F80 F82 F83 https://www.ebay.com/itm/122929837377

[IND-Distribution]

The OEM ones are so nice though.

[drgmt]

Originally Posted by IND-Distribution

The OEM ones are so nice though.

I know but 2.5K lol.

Hard to justify that.

[Aapparition90]

http://www.streetelement.com.au/stor...product_id=357

Something like this ?

[Wmf80]

Wow these look awful. And that much for it ?

[drgmt]

Originally Posted by Aapparition90

http://www.streetelement.com.au/stor...product_id=357

Something like this ?

Yeah mate. Similar.

Problem is that they don't have holes and I wouldn't be comfortable fixing them with 3M tape.

Don't think it's straightforward to drill carbon fibre.

[Aapparition90]

Just try the non drill ones for 200 i think there warehouses is in lidcombe.There is no going back once you drill into the body given the location.
If you like the look then you might have to spend the 2.5k 😎.
Lol seriously at 2.5k though. You can get some other cf stuff of that website too

[drgmt]

Originally Posted by Aapparition90

Just try the non drill ones for 200 i think there warehouses is in lidcombe.There is no going back once you drill into the body given the location.
If you like the look then you might have to spend the 2.5k .
Lol seriously at 2.5k though. You can get some other cf stuff of that website too

I'm abit worried about it holding with tape at that location - don't want to release a projecting missile at speed!

[Aapparition90]

Totally understand.. in that case this is all i could find. https://www.maperformance.com/produc...2-m4-ab-830402

It says it comes with screws but who knows.

[aBMWfan]

Originally Posted by drgmt

I know but 2.5K lol.

Hard to justify that.

++++++++++++++++++++++++++1.

Damn that might be the most overpriced add-on I’ve seen

[aBMWfan]

Originally Posted by drgmt

I'm abit worried about it holding with tape at that location - don't want to release a projecting missile at speed!

I vouch for double sided tape. I used it for my rear spoiler, JB speed front bumper Canards, and even my M side skirts too, without any screws.

Everything held perfectly over the last year. Just make sure to cut it to fit, and use the 15-30lb. Stuff!