San Marino Blue M4CS - track build

funk323 · 06-15-2023, 01:01 PM

downpipes have arrived, I will put them in later in the season. I need to get my ECU unlocked before I can get any tuning done.

I grabbed the PWR cooler as I couldn't live with the bolts showing on the CSF one.

b_w. · 06-20-2023, 11:43 PM

How is that front splitter driving around town?

funk323 · 06-21-2023, 05:37 AM

Quote:

Originally Posted by b_w.

How is that front splitter driving around town?

Not terrible at all.

Alexander13. · 06-21-2023, 06:51 PM

Did you get the 55mm thicker PWR radiator? I have had mine turn up and no chance of it even fitting without modifying everything. Any tips on how you made yours fit?

funk323 · 06-21-2023, 07:39 PM

Quote:

Originally Posted by Alexander13.

Did you get the 55mm thicker PWR radiator? I have had mine turn up and no chance of it even fitting without modifying everything. Any tips on how you made yours fit?

I haven't fitted it yet either. What modifications are needed? I wasnt told about any haha.

Alexander13. · 06-21-2023, 08:00 PM

Quote:

Originally Posted by funk323

I haven't fitted it yet either. What modifications are needed? I wasnt told about any haha.

Neither was I haha. It is approximately 22mm thicker in the tanks and mine didnt fit into the OEM radiator pack(plastic surrounds). Now I know Kies Motorsport made it fit a M4 GTS, I've reached out to them this morning and hope that maybe the GTS uses a different Radiator mount. But yet to hear back. Other side is that I have dropped my OEM radiator and the radiator pack to PWR here in Australia for them to see if they can make an OEM fit unit.

Same as you, track focused car build here, would love for their thicker radiator to fit.

funk323 · 06-22-2023, 08:52 AM

Yes I did see it go into the GTS on Kies video, but they didnt say anything about fitment, so I figured it was a straight swap. Thanks for the heads up.

Alexander13. · 06-22-2023, 05:11 PM

Quote:

Originally Posted by funk323

Yes I did see it go into the GTS on Kies video, but they didnt say anything about fitment, so I figured it was a straight swap. Thanks for the heads up.

This was my thoughts too. Turns out I was wrong. If all goes well Bryan at Kies might get back to me about it.

funk323 · 06-26-2023, 06:41 PM

I was able to get the car out to the track for some fun. I didn't get to my goal of the day but only .3 off. Car felt super composed.

funk323 · 06-30-2023, 05:47 PM

Today I did a DCT fluid/filter change, wait a mess I made haha are did a quick brake bleed. Heading out for another track day tomorrow. After this track day I will pull the CSF cooler to get to the ECU and swap in the PWR.

picked up an AIM Solo 2 DL to capture some data.

funk323 · 07-02-2023, 10:31 AM

spend another day at the track, though this time I ran into some overheating issues. The day was hot and I did push the car, but I have my doubts that the car should have over heated. I have the PWR rad to fit still, so that may help.

video from a friend at the end of the back straight.

NickyC · 07-02-2023, 10:54 AM

Nice, car looks great!

Question please as I might have missed it in your build sheet, can you please tell me about the carbon surround piece in your engine bay (right above the bumper, it's the CF piece you have which surrounds the hood latches/etc.)? I think that looks really nice. Thanks.

Wanted_M · 07-02-2023, 12:20 PM

You have two options, it's called the upper tie bar/radiator support, chose wisely. Slon or Dinmann.

https://slon-workshop.ru/category/parts-catalog/

https://www.dinmann.com/products/bmw...r-carbon-fiber

funk323 · 07-02-2023, 12:32 PM

Quote:

Originally Posted by NickyC

Nice, car looks great!

Question please as I might have missed it in your build sheet, can you please tell me about the carbon surround piece in your engine bay (right above the bumper, it's the CF piece you have which surrounds the hood latches/etc.)? I think that looks really nice. Thanks.

Ya sorry I didnt add it, was kinda a why not purchase.

https://ind-distribution.com/collections/m4-f82-f83/products/slon-workshop-f8x-m2-m3-m4-carbon-front-upper-tie-bar

NickyC · 07-02-2023, 04:13 PM

Quote:

Originally Posted by funk323

Ya sorry I didnt add it, was kinda a why not purchase.

https://ind-distribution.com/collect...-upper-tie-bar

Thanks!

mikerunt · 07-02-2023, 09:47 PM

Quote:

Originally Posted by funk323

Yes, first time using them, now I kick myself for never having them when I was building the subaru lol.

Are you using the quick jacks to service / swap stuff like exhaust or items in more of the center under the car?

Trying to get an idea of how tough that may be with the lack of access to under the car from the sides.

funk323 · 07-03-2023, 06:24 AM

I use the quick jack for everything, lowest setting is great for tires and engine bay/front bumper work, the highest setting is great for everything under the car. Lots of room to move around and get stuff done.

Honestly should have bought it sooner.

mikerunt · 07-05-2023, 10:30 AM

Quote:

Originally Posted by funk323

I use the quick jack for everything, lowest setting is great for tires and engine bay/front bumper work, the highest setting is great for everything under the car. Lots of room to move around and get stuff done.

Honestly should have bought it sooner.

Awesome - appreciate the feedback!

NickyC · 07-05-2023, 02:55 PM

Quote:

Originally Posted by Wanted_M

You have two options, it's called the upper tie bar/radiator support, chose wisely. Slon or Dinmann.

https://slon-workshop.ru/category/parts-catalog/

https://www.dinmann.com/products/bmw...r-carbon-fiber

Thanks x2!

funk323 · 07-26-2023, 08:28 AM

small update before track day tomorrow.

I Had the DME unlocked and when I went to install it, we ran into major issues. at first I thought I had screwed something up, but after a few days of tracing and trouble shooting, we found that a mouse got into the car and cut through the wires going to the touch box by the FEM.

Once that was fixed, the car started with zero codes ( started with 98 faults before the fix). flashed the car to stage 1 by BM3.

PWR intercooler install, PWR rad installed (the one I have is a direct fit, not the 55mm version, I didnt realize there was a difference since there was only 1 option on the PWR/C&R page).

AIM Solo and Smarty Cam installed, but was sent the wrong cable to connect the 2, so I am not sure I will have data overlay for this event (one was shipped but is MIA lol).

finally was able to install fully install the GTmore Splitter, I was missing the front center cable point, and only 4 of the 6 bolts into the chassis.

Vandaljimenez · 07-26-2023, 12:20 PM

This thing is an absolute monster. And what surprises me more is your ease of obtaining the parts for this build. Every single part you’ve put on this thing is bonkers. I had an STI as well, and parts are so cheap for those cars compared to these lol also, did you find out the reason the car overheated at the track? Was it the CSF Intercooler?

funk323 · 07-26-2023, 07:33 PM

Quote:

Originally Posted by Vandaljimenez

This thing is an absolute monster. And what surprises me more is your ease of obtaining the parts for this build. Every single part you’ve put on this thing is bonkers. I had an STI as well, and parts are so cheap for those cars compared to these lol also, did you find out the reason the car overheated at the track? Was it the CSF Intercooler?

thanks!

right now, it might have been air pockets in the cooling system, hopefully find out tomorrow haha.

06-15-2023, 01:01 PM	#23
funk323 Private 156 Rep 83 Posts Drives: BMW M4CS Join Date: Aug 2022 Location: Kingston iTrader: (0) Garage List 2019 BMW M4CS [10.00]	downpipes have arrived, I will put them in later in the season. I need to get my ECU unlocked before I can get any tuning done. I grabbed the PWR cooler as I couldn't live with the bolts showing on the CSF one.
	Appreciate 3 Wanted_M759.00 ilia381.00 JobanM73.50 Quote

06-20-2023, 11:43 PM	#24
b_w. Lieutenant 399 Rep 530 Posts Drives: F80 M3 Join Date: Jul 2022 Location: Alberta iTrader: (0)	How is that front splitter driving around town?
	Appreciate 0 Quote

06-21-2023, 06:51 PM	#26
Alexander13. Private 57 Rep 93 Posts Drives: F80 ZCP Ind. Join Date: Aug 2019 Location: Australia iTrader: (0)	Did you get the 55mm thicker PWR radiator? I have had mine turn up and no chance of it even fitting without modifying everything. Any tips on how you made yours fit?
	Appreciate 0 Quote

06-22-2023, 08:52 AM	#29
funk323 Private 156 Rep 83 Posts Drives: BMW M4CS Join Date: Aug 2022 Location: Kingston iTrader: (0) Garage List 2019 BMW M4CS [10.00]	Yes I did see it go into the GTS on Kies video, but they didnt say anything about fitment, so I figured it was a straight swap. Thanks for the heads up.
	Appreciate 0 Quote

06-26-2023, 06:41 PM	#31
funk323 Private 156 Rep 83 Posts Drives: BMW M4CS Join Date: Aug 2022 Location: Kingston iTrader: (0) Garage List 2019 BMW M4CS [10.00]	I was able to get the car out to the track for some fun. I didn't get to my goal of the day but only .3 off. Car felt super composed.
	Appreciate 6 Car-Addicted7049.00 mikerunt306.00 TTM0TION425.00 GreenGoblin51.50 heitzke1152.50 JobanM73.50 Quote

06-30-2023, 05:47 PM	#32
funk323 Private 156 Rep 83 Posts Drives: BMW M4CS Join Date: Aug 2022 Location: Kingston iTrader: (0) Garage List 2019 BMW M4CS [10.00]	Today I did a DCT fluid/filter change, wait a mess I made haha are did a quick brake bleed. Heading out for another track day tomorrow. After this track day I will pull the CSF cooler to get to the ECU and swap in the PWR. picked up an AIM Solo 2 DL to capture some data.
	Appreciate 2 JobanM73.50 Drifter2090909.50 Quote

07-02-2023, 10:31 AM	#33
funk323 Private 156 Rep 83 Posts Drives: BMW M4CS Join Date: Aug 2022 Location: Kingston iTrader: (0) Garage List 2019 BMW M4CS [10.00]	spend another day at the track, though this time I ran into some overheating issues. The day was hot and I did push the car, but I have my doubts that the car should have over heated. I have the PWR rad to fit still, so that may help. video from a friend at the end of the back straight.
	Appreciate 2 NickyC17484.50 JobanM73.50 Quote

07-02-2023, 10:54 AM	#34
NickyC Lieutenant General 17485 Rep 10,663 Posts Drives: M4 CS. Former G82, x2 F82, F80 Join Date: Nov 2010 Location: Jacked out of my mind iTrader: (23)	Nice, car looks great! Question please as I might have missed it in your build sheet, can you please tell me about the carbon surround piece in your engine bay (right above the bumper, it's the CF piece you have which surrounds the hood latches/etc.)? I think that looks really nice. Thanks.
	Appreciate 1 funk323156.00 Quote

07-02-2023, 12:20 PM	#35
Wanted_M Captain 759 Rep 950 Posts Drives: Frozen Blue M4CS Join Date: Jul 2009 Location: Norcal iTrader: (2)	You have two options, it's called the upper tie bar/radiator support, chose wisely. Slon or Dinmann. https://slon-workshop.ru/category/parts-catalog/ https://www.dinmann.com/products/bmw...r-carbon-fiber __________________ M4CS Frozen Blue ARM DP's/Resonated Mid-pipe \| SPL links \| Hotchkis bars \| JRZ RS2/camber plates \| K&N \| Koyorad HX \| Powerflex purple \| Rouge \| Spiegler \| Speed Eng. snorkel \| Vargas CBC/hub \| Wagner IC \| xHP \| Xpel stealth ppf
	Appreciate 1 NickyC17484.50 Quote

07-03-2023, 06:24 AM	#39
funk323 Private 156 Rep 83 Posts Drives: BMW M4CS Join Date: Aug 2022 Location: Kingston iTrader: (0) Garage List 2019 BMW M4CS [10.00]	I use the quick jack for everything, lowest setting is great for tires and engine bay/front bumper work, the highest setting is great for everything under the car. Lots of room to move around and get stuff done. Honestly should have bought it sooner.
	Appreciate 1 mikerunt306.00 Quote

07-26-2023, 08:28 AM	#42
funk323 Private 156 Rep 83 Posts Drives: BMW M4CS Join Date: Aug 2022 Location: Kingston iTrader: (0) Garage List 2019 BMW M4CS [10.00]	small update before track day tomorrow. I Had the DME unlocked and when I went to install it, we ran into major issues. at first I thought I had screwed something up, but after a few days of tracing and trouble shooting, we found that a mouse got into the car and cut through the wires going to the touch box by the FEM. Once that was fixed, the car started with zero codes ( started with 98 faults before the fix). flashed the car to stage 1 by BM3. PWR intercooler install, PWR rad installed (the one I have is a direct fit, not the 55mm version, I didnt realize there was a difference since there was only 1 option on the PWR/C&R page). AIM Solo and Smarty Cam installed, but was sent the wrong cable to connect the 2, so I am not sure I will have data overlay for this event (one was shipped but is MIA lol). finally was able to install fully install the GTmore Splitter, I was missing the front center cable point, and only 4 of the 6 bolts into the chassis.
	Appreciate 1 JobanM73.50 Quote

07-26-2023, 12:20 PM	#43
Vandaljimenez Private First Class 160 Rep 171 Posts Drives: 2015 BMW M3 Join Date: Jun 2021 Location: Miami, FL iTrader: (0) Garage List 2015 BMW M3 [0.00]	This thing is an absolute monster. And what surprises me more is your ease of obtaining the parts for this build. Every single part you’ve put on this thing is bonkers. I had an STI as well, and parts are so cheap for those cars compared to these lol also, did you find out the reason the car overheated at the track? Was it the CSF Intercooler?
	Appreciate 1 funk323156.00 Quote