Quote:
Originally Posted by blockdoc
Quote:
Originally Posted by CAOZKAN
Quote:
Originally Posted by blockdoc
Quote:
Originally Posted by CAOZKAN
Yesterday I got a new Forge Charge cooler installed. I got a bit scared by the leaking charge cooler posts and decided to go for it. The quality of the product is amazing, the only problem is, it's rubbing to the hood under WOT so I will have to figure it out.
The problem I have is that after installing there is strange sucking sound under WOT after installing it. Today I got an error code from the car 20A201:auxiliary coolant pump for Charge cooler, dry running detected. I checked the level of coolant fluid, it was 1/3 of max which I perfectly remember to be topped at the installation. Did anybody have similar problem?
Meanwhile, I topped the fluid again cleared the code and drove again for a while but didn't have any problem, just the suction sound is still there.
|
Did you run the purge cycle after replacing the cooler? |
I believe my mechanic did it but is there a document for how to do it? |
https://www.bimmerpost.com/forums/sh...php?p=24962333 |
I don't know why but this one didn't work for my car, it didn't trigger the cycle.