Quote:
Originally Posted by marauder1
Let me know if you find anything. Otherwise thinking I’ll source the clip from and build my own.
|
Worse case scenario if I can't find the extenders, I'll buy the same wire gauge, cut to the length you need. Purchase same size wire heat shrink to overlap the new/old wires. Cut one wire at a time then soldered your wire extensions. Roll the heat shrink over the soldered wires and hit it with a heat gun. Hide it thru the lower panels/securing them and use wire plastic protectors that you can buy at any auto store and there you go. Did this on two of my previous cars and had zero issues. One thing to note, make sure to get the correct ohms (check the resistance with a meter) for the wires.
I think it cost me like $50.
Creativity at its best
.