Quote:
Originally Posted by toni8284
Hi Shawn shawnsheridan
I am using E-Sys Launcher PRO 2.x to launch E-Sys 3.27.1 to code my 2021 M2C F87.
1)
In the connection, there are 2 target for F020.
F020_20_11_557 and F020_21_03_545.
which one should I use?
2) I try to follow this to add 8TH to my car.
1) 8TH to VO
2) HU_CIC, 3001 EXBOX, SPEEDLIMIT_INFO = aktiv
3) KOMBI, 3000 Anzeige_Konfiguration, SPEED LIMIT GENERATION = sli_gen2
4) KOMBI, 3003 FZG_Ausstattung, SPEED_LIMIT = aktiv
5) KAFAS, 3010 SLI_CODING, SLI_ON_OFF = SLI_ON
6) KAFAS, 3010 SLI_CODING, CODE_ELECTRIC_HORIZON = nicht_aktiv
7) KAFAS, 3010 SLI_CODING, Country_code_display = wert_3
8) KAFAS, 3010 SLI_CODING, UNIT DISPLAY = wert_4
9) KAFAS, 3020 KAFAS_COMMON, COUNTRY_VARIATION = wert_3
10) Turned on Speed Limit Info in the display
1 and 2 are done. But when doing KOMBI, I only see KOMBI2 and the text not available and trimmed function. How do I fix it?
|
1. Use bottom (newer) one, F020_21_03_545.
2.If Trimmed, you need newer Launcher PRO 3.x or E-SysX, but unfortunately neither is a available now or for the foreseeable future, leaving only finding someone with one of them to FDL Code it for you.