|
Just a tip to everyone who scrapes and destroys their splitters:
I run the OEM M performance splitter on my M4. I have Öhlins road&track suspension and my clearance to the ground is 90mm's.
I decided to fabricate a little skidplate to protect the carbon splitter so i bought a sheet of black plastic, the same type cuttingboards are made of, fat and slippery. I took 5mm thickness. Then i used another M performnace splitter as a template and cut it out with a fine hacksaw, filed the edges, drilled some holes and screwede it into the carbon splitter. The flat head screws hooked really hard in the carbon.
it works amazingly good! If i hit the ground it just slides over and there is no damage to the splitter at all. Perfect!
|