[sly1types]

Hey guys, what is your spring/damper setup? Are you running sways?

My local track has a lot of high speed left turns and I'm getting a lot of wear on my outside drivers tires and inside passenger rear.

I'm running these camber settings -3.2F and -2.2R with MCS 2 way remotes with 700F and 600R and Bridgestone RE71r 265/35/19 and 305/30/19 on a custom flex track tune where I run about E50-60.

My suspension settings are:
Front 12C 9R
Rear 10C 9R
175PSI can pressure front and rear

The car feels great and I'm able to slide it around/get a nice slip angle, controlled with some turn-in understeer, but puts the power down very well.

Since RE71R tires are gone I'm planning on going with Goodyear supercar 3R in the above sizes and then I will be able to rotate left to right so that should help some. I also might start running Pirelli takeoffs.

This is picture showing the most lean out of all the pics that were taken at gridlife.

I'm thinking of going to 800lb front springs? Or should I do a front sway? If so which one?

These tires have about 20 sessions.