Quote:
Originally Posted by shawnsheridan
Quote:
Originally Posted by dawei213
That unfortunately did not have the desired effect. It's the same repeatable error unfortunately.
Even when I tried to Read Coding Data, it throws this error:
Checking the logs, i see this found this:
negative response error:
code: TIMEOUT P2/T2 occurred
description: P2 timeout on Service RDBI_SVK has error in result: [Severity=2051][ErrorCode=58640][ErrorCodeDescription=resource not available][VendorCode=2142][VendorCodeDescription=P2 timeout occured]; LinkName: DME2_12_ETHERNET
severity: ERROR
Looks like entity DME2_12_ETHERNET can't be accessed or not found:
|
Car Battery may not be strong enough, meaning you need to put car on 50 Amp plus Charger or jump car to another car with motor running, then try again.
|
So it seems like 12.6V as the min may not be correct? I just measured my battery (havent driven it at all since yesterday) and it measures 13.95V across the terminals. I may run it and charge it until it gets over 15V and try again.