|
i'm swapping my front pads to Pagid RS29s this week. just wanna confirm with you guys the following sequence...
1) break loose front wheel bolts
2) jack up front of car
3) remove wheels
4) pop out pins (watch out for flying spring)
5) push pads outwards (against caliper)
6) remove pads
7) remove pad sensor
8) lube up pad backing, the slots where the pins go thru, pins, with anti-squeal compound
9) install pads, pad sensor
10) replace pins and spring
11) remount wheels
12) hand tight wheel bolts in 'star' pattern
13) lower car
14) torque wheel bolts to 110 lb-ft
sounds about right?
__________________
My Trackable Street Car
2016 BMW M4 GTS
|