[tom @ eas]

Our LCI Taillight kit will include 4 OEM BMW taillights (inner/outer) and Left/Right harnesses. Coding is required once installation is completed.

Pre-installation

Kit contents
- Left LCI Outer Taillight
- Left LCI InnerTaillight
- Right LCI Outer Taillight
- Right LCI Inner Taillight
- Left/Right Drip Rails
- Wiring Harness Kit
- Detailed instructions

Tools required
- 3/8" Ratchet
- 10mm socket
- 12mm socket
- Phillips screwdriver
- Trim removal tool

Installation

1. Open Trunk, remove battery cover


2. Remove Drip Rails, outer taillight, unplug and set aside


3. Remove taillight. Use masking tape (optional) to protect paint surface


4. Remove both trunk support arm plastic covers, 2 clips hold each cover on


5. Remove plastic trunk felt liner screws and inner trunk release (glow-in-the-dark) handle


6. Set handle and felt liner aside


7. Unplug inner trunk tail lamp


8. Install new LCI inner Trunk Lamp


9. Reinstall new LCI outer Tail lamps, Drip Rails and bolt into place


10. Almost done! Verify alignment and repeat steps for other tail lamp