Quote:
Originally Posted by TopJimmy
Doubtful this is his problem. Here's why:
I reviewed their install instructions. Andream intercepts (middle mans) the MMI and display signals. There is no connection to the CANBUS. Some optical A/V and the Aux Input are moved over to their "quadlock" plug.
BM3 flash and all plug-in E% sensors work on the CANBUS. If there's a problem with your ethanol percentage readings it's more likely that your E% Sensor is on the fritz. If it's not the sensor then something is messing with (overwriting) the E% value on the bus network.
|
However, Andream has to read CAN data as well otherwise you wouldn't be able to control it with the the joystick or steering wheel controls and it wouldn't be able to detect reverse.