Quote:
Originally Posted by smr123
Just a couple of added notes after having done the install. On the rear, it is not stated you will need a spring compressor to get the spring out, or to drop the lower control arm. If you choose to drop the arm, mark the camber adjuster eccentric before removal.
Also, I suggest exchanging the front set screws with soft tip nylon type (McMaster Carr 93285A316) to prevent damaging the threads with the steel set.
|
Drop the arm on the inner side towards the subframe. There's no camber adjustment at that mount location. No need to mark anything. Only goes back in one position.