View Single Post
      01-19-2020, 10:39 PM   #19
jmg
Lieutenant General
jmg's Avatar
18704
Rep
14,115
Posts

Drives: G82 M4C X-Drive
Join Date: Mar 2013
Location: Orange County, CA

iTrader: (1)

Garage List
2022 G82 M4C X-Drive  [9.85]
2018 F80 M3 CS  [9.87]
2019 i3 BEV  [0.00]
Quote:
Originally Posted by SD ///M4 View Post
I've been tracking my 2016 M4 since May 2016, 24 days at last count. I have dedicated track wheels/tires, brake pads, and I have camber plates and Dinan springs.

You don't need to do anything special to take your car to the track, but if you are looking for the bare minimum I would suggest brake pads. I've seen people toast their stock F80 brakes at the track after one day. Because I always take my street pads with me to the track as backup I was able to save one guy's weekend and his ability to drive home afterwards by selling him my lightly used stock pads. I use the Pagid RSL29 "yellow" pads. Just bought my second full set for an upcoming track weekend in February. They run around $600 for a full set. I wouldn't run on the stock pads without having spares.

Next would be a dedicated set of track wheels and tires. I run APEX EC-7 18x10 front, 18x11 rear with Nitto NT01 275/35-18 front, 305/35-18 rear. A lot of people think that the RE-71R is the best track tire, but more seasoned track people run the NT01 because it's available in an 18" 305 width and the RE71R isn't. 18" wheels and tires are also lighter and cheaper than 19" or 20" and the stock wheels are heavy, especially the Style 666 wheel on the Competition Package. Look on the APEX website for their blog on fitting the optimal wheel/tire package on the F80 platform. If you're going to get a dedicated set of track wheels/tires, you might as well get the optimal setup rather than make compromises using stock wheels.

There is no need to run special brake fluid, the stock BMW fluid is just fine.

Take a good analog "racing" tire pressure gauge, the kind with a dial and a hose that lets your overfill and then bleed down to the correct psi. Take your tire pressure immediately after getting off the track and immediately before getting on the track. You want around 32 psi before and no more than around 38 psi after. You'll probably need to top off your tires at the end of the day to drive home.
Running 305 rear is what is swaying me towards the Nittos. I've also read that the Nittos have gradual breakaway at the limit which is attractive to a beginner-intermediate like me. Theory being that it's safer?? Correct me if I'm wrong. How does the Re71r compare in that sense?
__________________

2022 G82///M4 Competition X-Drive - KW-HAS, EBC Bluestuff, Millway Race Camber Plates, Cup2 Connect*, PSI High Flow Midpipe, Lightweight Front Lip, M Perf Flow Through Wing
Previous • 2018 F80 ///M3 CS • 2016 F80 ///M3
IG: Raging_G82
Appreciate 0