Quote:
Originally Posted by robbo mcs
Thanks for doing this. However, some of it doesn't really make sense.
Your settings show you have significantly boosted low freq 100 and 200hz, yet the black trace shows these significantly below the "flat" blue trace. Likewise the high frequency 10khz. The boosted mid range 1-2khz does seem higher
Am I reading this correctly, blue is flat, black is with the eq adjustments?
|
The recording levels had changed slightly between the first and last measurement. After adjusting the levels, the graphs look more like what you might be expecting. Across the board, the black measurement is now showing the increases one might expect with the settings I have applied. Also, for the flat response, I only measured down to 100Hz. I could go back and re-measure, but it is a bit of a chore to get everything set up again.