[PayamFSU]

Just did mine, pretty painless hardest part was the sensor and that took like 2 minutes. Picked up a short punch kit at HF for 8$. Cleaned the wheels when I had them off , scratched the back portions pretty bad (must have been small road debris that got on the sponge. Be mindful of this. Anyways I applied some Sonax to the caliper and wheels, that stuff really gives a deep shine! I did the recommended bedding procedure and drove around about 100miles. As everyone has mentioned less bite but still pretty similar stopping power. Obviously needs to be instrument tested but doesn't appear to be anything drastically different. Wheels are much cleaner we will see by the end of the week but so far so good. My rears never dusted anywhere near as bad as the fronts so I'm going to just leave the rears stock.