Quote:
Originally Posted by LOW4LYF
Any additional drilling needed?
|
There are holes that line up with OEM screws - so you just unscrew those specific ones and then line up the holes and screw them in. And then it comes with a bag of self-tapping screws that you can use to reinforce it in other places. There are holes in the diffuser to use the self-tapping screws with. They all worked fine (as in, they line up with plastic that can be screwed in to) except for 1 that lined up with something metal so I just drilled one hole in the diffuser an inch away from that spot and then the self tapping screw worked.