[Ryan@IND]

The BMW Performance division continues to expand their offerings all the while keying into the desires of BMW enthusiasts around the world. The F8X M3/M4 Performance parts are a more aggressive option created by the designers at BMW ///M. The aero options from the Performance division , design by BMW ///M provide a more sporty and aggressive look all the while maintaining or accenting the factory lines. The kit includes carbon fiber front splitters, trunk spoiler, rear diffuser, and of course mirror covers. All BMW Performance carbon parts are 2x2 weave.

Please contact an IND representative with further questions.


Step 1:
The OEM diffuser is secured by 2 screws and multiple clips on the upper partition. There are two screws in the center of the diffuser that must be removed, but are not important to the factory diffuser install. Using the 8mm socket remove all 4 screws

Step 2:
With the screws removed simply pull the diffuser from the bumper. The top clips do not require much pressure so no body tools are required.

Step 3:
With the diffuser removed it is now time for install of the M Performance carbon fiber diffuser. This piece utilizes all 4 8mm screws and the existing body clips. Step 1 of the installation is to lineup the clips and carefully press into place.

Step 4:
Now that the diffuser is loosely secured by the mounting tabs simply tighten the four 8mm screws.

Enjoy!