Quote:
Originally Posted by Corsa Motorsport
Final Prep for Bimmer Challenge Round 2
With the tune gremlins sorted out there was no much left to do to finalize the car for it's second time attack competition aside from alignment. I brought the car over to Robert Choo at Chewerks and we made some slight adjustments with the limited parts we had. We increased front camber from -3.5 to -3.7 and removed a bit of rear toe to help the car rotate a bit better. Unfortunately I dropped a wheel and bent one of the TE37s at Streets of Willow. We were able to bend it back to balance out perfectly (Forged ftmfw) and we refinished them in house to Volk Racing Ti Silver. This time around, we will no longer be running slicks but rather a street tire in hopes of beating out time with both slicks and 100tw tires. The tire of choice was a 295/30/18 Yokohama Advan A052. Gave the filthy thing a wash, and we're just about ready to load up.
Attachment 2249124
Attachment 2249125
Attachment 2249126
Attachment 2249127
Attachment 2249128
Attachment 2249129
Attachment 2249130
Attachment 2249131
Attachment 2249132
Attachment 2249133
|
Great thread and appreciate the posts. How do you like the A052s and what rear camber/toe are you running? Running similar front camber, but balance is off and trying rear toe arms and camber shims.