View Single Post
      06-19-2019, 10:53 PM   #5
Bx2SoCal
New Member
8
Rep
15
Posts

Drives: 2016 M4
Join Date: Jun 2019
Location: Los Angeles

iTrader: (0)

Quote:
Originally Posted by FaRKle! View Post
F83 is significantly heavier than F80/82 (~120lbs front ~415lbs rear) and BMW's OE springs for it are stiffer as a result to maintain the same ride height. For example, for the comp pack, the front F83 spring is 7% stiffer than the F80/82 and the rear is 32% stiffer.

The EMD front spring rate (194lbs/in) is just slightly less than F80/82 comp pack front and the rear (645lbs/in) is identical to the F80/82 comp pack (but linear and not progressive). In fact the rear EMD spring rate is 15% softer than the F83 base rear spring.

It wouldn't surprise me if your bottoming out feeling is coming from hitting the bump stops and getting deeper into them a lot sooner than you would normally. As for rubbing under compression, check the liner near the outside edge of the wheel well at the 10 o'clock spot. It protrudes closer to the tire there and with your spacers you'll be getting even closer to that.
Quote:
Originally Posted by FaRKle! View Post
F83 is significantly heavier than F80/82 (~120lbs front ~415lbs rear) and BMW's OE springs for it are stiffer as a result to maintain the same ride height. For example, for the comp pack, the front F83 spring is 7% stiffer than the F80/82 and the rear is 32% stiffer.

The EMD front spring rate (194lbs/in) is just slightly less than F80/82 comp pack front and the rear (645lbs/in) is identical to the F80/82 comp pack (but linear and not progressive). In fact the rear EMD spring rate is 15% softer than the F83 base rear spring.

It wouldn't surprise me if your bottoming out feeling is coming from hitting the bump stops and getting deeper into them a lot sooner than you would normally. As for rubbing under compression, check the liner near the outside edge of the wheel well at the 10 o'clock spot. It protrudes closer to the tire there and with your spacers you'll be getting even closer to that.

Thank you fellas. I definitely rushed into this without doing any research. I came from having an F10 and had no issues with my H&R's and went with the shops recommendations since they were the so called F80/82 go to shop. I'm gonna swap out my spacers for 12mm and see how much that helps.
Appreciate 0