Quote:
Originally Posted by hellokitty
How much differential noise do you hear using the ECS bushings? Is it noticeable at all or very faint where you can only hear it if you really listen for it?
I came from solid aluminum diff bushings on my last car so I know my tolerance for NVH lol
I'm considering the turner kit but using a softer bushing like the power flex purple. Seems like that setup is 25% stiffer than stock with absolutely zero added drivetrain noise.
|
Quote:
Originally Posted by MakeMuricaGreater
Quote:
Originally Posted by iDriftYou
Replaced mine with the Turner plate and poly/solid bushings, did it before they cracked. It is a proper PITA to replace, you have to drop the whole subframe, took us about 5 hours
|
The Turner plate and their bushings set are the ideal solution. Glad I did the same! |
I have VTT motor mount plates and ecs trans mounts (6MT), NVH is noticeable but I still daily my car, my biggest issue with the factory diff mounts was the drivetrain lash, completely eliminated after the ecs diff plate but clutch engagement is a lot less forgiving as well.