Quote:
Originally Posted by xxaarraa
Quote:
Originally Posted by hellokitty
That doesn't sound normal.
Try using an impact to tighten the top nut. Also spray some WD-40 silicone lube on the top bearing.
Make sure to blast out any dirt with air before doing the above.
|
Thanks for the suggestions.
Where do you spray the top bearing from? It doesn’t seem like the top bearing is accessible from the top side where you adjust the camber plates. Do you have to dis-assemble the struts and get to the bearing from underneath?
|
Spray it around the top nut area… there is a bearing below that