Quote:
Originally Posted by d00bies
A lot of people say these coilovers are really good. I installed them on my f82 and the front is pretty bouncy. I maxed out rebound and compression up front. Is there something im missing? Still has about 1 finger gap so its not lowered all the way. Anyone know the stock spring rates on the jrz rs2 coilovers? Thnking about getting some stiffer springs.
|
On the street, stiffer springs will not reduce the "bounciness"; a softer spring will smooth out the bounce. I've seen JRZ RS2 come with different spring rates but mine was: Front 500lb main spring + 150lb tender spring. Rear 700lb main spring.
I swapped my front main spring to 350lb. It's a bit too soft. I suggest a 400lb would be perfect for the street.
But before you go that route, try adjusting the compression/rebound on the rear first. This will eliminate almost all the "bounce". Start from this and adjust to taste...
STREET SET UP
FRONT
Compression: 5
Rebound: 9
REAR
Compression: 2
Rebound: 5
Note: 0 is full soft