Quote:
Originally Posted by TopJimmy
If your Injen is an under hood kit without boxes then you're gonna get engine heat coming into the air path. Try switching in your stock air boxes and testing IATs again the same day.
|
So my Injen intake has an enclosure that I had removed for more noise. Yesterday I put them back on and immediately there is a difference in IAT.
Granted, the weather this morning was 80-82 deg F. So according to these logs I am still hitting 20deg over ambient during this pull.
The only thing that came to mind was the Agency Power TMIC, after I replaced it I only did procedure to run the pump twice and If I remember correctly it still had some bubbles towards the end but because I didnt have a battery tender I did not do it a third time.
Could there still be air in the system which is stopping the flow of coolant to the unit thus causing these higher IAT's??
Thanks all
https://www.bootmod3.net/log?id=60e6...729b3d252ed899