Quote:
Originally Posted by MINERALWHITE_F80M3
Quote:
Originally Posted by hellokitty
Do you have a upgraded front mount heat exchanger?
I did a csf front mount exchanger but kept my stock top intercooler.
Before the heat exchanger, I was running 20 above ambient like you. After, my best was 13 above ambient.
I would run the pump again to make sure no air, then switch to a lower antifreeze mix with more distilled water and add redline water wetter. Do this first and check again before touching your top mount exchanger…
|
Negative still running the oem heat exchanger!
Ill run the pump and have a jug of distilled to top off if needed and ill add the water wetter.
Ill report back soon, thanks!
|
Ok that makes sense. The power gains primarily come from an upgraded heat exchanger. The top mount is really a durability modification.