[Kilabyte]

Hey all, a few days ago I had kubax86 code the feature in my car. I DO have the right hardware.

Last night I was finally able to take her out and do some testing.

If I turn on high beams it's just that, high beams.

If I turn on Auto high beams it seems to try to do something but I don't see the desired effect. When closing on a car on a dark highway it will go from full on high beams to having the blue HB icon lit up but, but switches to low beams, if I press the Auto button on and off I can see some light movement on the right side of the road (mainly side of the road) but that's about it, I never see a tunnel forming around the car I'm approaching. It all looks to be only low beams operating during this time. Also the Auto feature seems to be turning on and off quite frequently like it did with the stock coding when there is ANYTHING approaching from the opposite direction

I tested this on a dark 1-2 lane highway with light traffic and no other light sources

I am not sure if something is not coded right, I have a bunch of footage from my dash cam but I don't believe it will show anything.

My car sits on Eibach springs and there were no adjustments made to the headlight height after the install 3 years ago if that makes any difference.


TIA