View Single Post
      02-09-2021, 10:43 AM   #18
1000hp
Lieutenant
248
Rep
471
Posts

Drives: F80 M3
Join Date: Dec 2020
Location: Virginia Beach, VA

iTrader: (2)

Quote:
Originally Posted by CaliF80rnia View Post
F80 M3 non ZCP. Have the swift springs and I also req Alex to code in CS EDC.

Comfort is nice. Its softer and I would say a step softer than comfort on stock.
Sport is what I normally drive on. Can feel the road and its bearable.
Sport+ much stiffer.

1 downside is it feels like it has slightly more bodyroll as you're turning corners. Then again, on most roads it doesn't really matter too much.
See the post above yours. I have the same springs and coding, but with ZCP dampers.
As racer20 stated, the body roll is likely due to the softer rear sway bar on our non-ZCP cars. The CS coding for damping is based on a stiffer rear bar, and the roll damping will be softer because of that.
I just ordered a ZCP rear bar on ebay for $100. I'll report back once I get it on the car and drive it.
Appreciate 1