Quote:
Originally Posted by TopJimmy
Quote:
Originally Posted by Motown65
Quote:
Originally Posted by TopJimmy
Yes, and I have drag tires so i have to tweak for best hookup.
Set initial launch to 3500RPM.
For street tires go with the XHP recommended stock settings for DS (15), TI (7) and TAS (0). If you get too much spin back off the DS and TI by 5 (10, 2, 0). You should feel a little spin in first gear, but second gear and up should be no slip. Leave TAS alone.
If you get any wheelspin at the top of a gear use BM3 TQ Reduction to bring power on that gear down a little. Sometimes my top of 3rd spins a little if the track prep is worn out.
|
im running 305 mt et ss. What tire and settings do you actually run?
|
Hoosier 315/30/18 on Apex 11" at 25PSI.
Water box roll and foot-brake burnout.
The 15/7/0 settings work best so far…
|
Hey bro how was your 60 foot?