To get that bolt hole alignment you usually need to rotate the CBC one or two more ticks around the bolt face. The pattern of the slots on a Vargas CBC lines up like 98% of the time with the pulley bolt holes. There is indeed one small angle that doesn't let the bolts line up, but a guy had success with a dremel adjusting the ends of the slots in the CBC a tiny bit. This tweaking doesn't weaken the bolt clamping ability as long as the bolts can still be torqued properly.
__________________
'18 F80 Base 6MT | '19 F82 Exec DCT | '18 F82 Comp Exec DCT | '23 G80cx
|