Quote:
Originally Posted by MR RIZK
I'm a little lost in the question however I'm pretty sure the CSR front sway bar holes are in the same position as the oem one. I don't recall having to adjust my SPL endlinks when I swapped from OEM to CSR to get the geometry correct.
The oem end link is 315mm centre to centre.
Hope that helps.
|
I appreciate your response. Sorry that's what I get for posting late, I even confused myself re-reading it.
I was referring to the length of the end links. I know when lowering and/or using an adjustable sway bar, you might need to adjust the length of the end links to ensure there is no preload on the sway bar and to ensure the right geometry.